暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

IHDAPP

IHDAPP SATA to USB 3.0 Adapter 2.5 3.5 inch with 12V 2A Power Supply

SKU CH-Q1M8-DEQ7J

Connects 2.5" or 3.5" SATA drives via USB 3.0 at up to 5 Gbps with UASP, includes 12 V 2 A power supply

  • Changer TypeUSB to SATA
  • Connector A1 x USB 3.0
  • Connector B1 x SATA III

Model Standard

  • Connect 2.5" or 3.5" SATA drives externally via USB 3.0
  • Transfer data up to 5 Gbps with UASP acceleration
  • Plug-and-play hot-swap without installing drives in enclosures
  • Works with Windows, Mac OS, PS4 and Xbox
  • Includes 12 V 2 A power adapter for 3.5" drives

Connect 2.5 and 3.5 SATA drives via USB 3.0

This adapter lets any standard 2.5 inch or 3.5 inch SATA hard drive or solid-state drive connect to a USB 3.0 port on a computer or laptop. It is aimed at users who need quick access to bare drives for data migration, cloning, backup or recovery without installing them inside an enclosure. The included 12V 2A power supply ensures 3.5 inch drives receive adequate power.

UASP support and plug-and-play convenience

The cable uses a USB 3.0 connector on one end and a combined 7+15 pin SATA III connector on the other, plus a DC jack for the external power adapter. UASP capability reduces processor overhead by 80 percent and can deliver up to 70 percent faster transfers than traditional USB 3.0 when the host also supports UASP. Hot-swap and plug-and-play operation mean drives can be swapped without rebooting.

Upgrade from slower USB 2.0 adapters

If you have been limited to USB 2.0 speeds or have had to open a case to reach SATA data, this adapter removes that bottleneck and physical hassle. The jump is worth it when moving large media libraries, cloning system drives or reviving older 3.5 inch desktop drives on a modern laptop that lacks internal drive bays.

特長

  • Connect 2.5" or 3.5" SATA drives externally via USB 3.0
  • Transfer data up to 5 Gbps with UASP acceleration
  • Plug-and-play hot-swap without installing drives in enclosures
  • Works with Windows, Mac OS, PS4 and Xbox
  • Includes 12 V 2 A power adapter for 3.5" drives

仕様

Changer TypeUSB to SATA
Connector A1 x USB 3.0
Connector B1 x SATA III

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What practical speed does the USB 3.0 interface cap at when UASP is active?

The adapter reaches up to 5 Gbps with UASP enabled, which is 70% faster than standard USB 3.0 and cuts processor load by 80%.

Which drive sizes and power needs does the 12V 2A supply cover?

It powers both 2.5" and 3.5" SATA drives; the 12V 2A adapter connects via the DC-Jack port on the cable.

How do you install it, and which step is often missed?

Plug the SATA connector into the drive, attach the USB 3.0 end to the computer, connect the 12V 2A power supply to the DC-Jack, then power on — forgetting the external power brick is the common error.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。