Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
A 3.5 inch resistive touch screen development board with green PCB and gold plated connectors

KEHIPI

KEHIPI 3.5inch Touch Screen 480x320 development board

SKU CH-1RSS-VYDKE

A 3.5 inch TFT LCD with 480x320 resolution and resistive touch, compatible with Raspberry Pi 5, 4B, 3B, Zero and Pico boards

  • Resistive touch for direct input on a 3.5 inch 480x320 display
  • Ready-to-use drivers for Raspbian, Ubuntu and Kali systems
  • FBCP software driver enables dual-display configuration
  • Immersion gold surface plating for durable connector contacts
  • Compatible with Raspberry Pi 5, 4B, 3B, Zero and Pico boards

Compact 3.5 inch Touch Display for Raspberry Pi

This 3.5 inch TFT LCD adds a 480x320 resistive touchscreen to Raspberry Pi 5, 4B, 3B, Zero, Zero W, Zero 2W, Pico, Pico W and Pico WH boards. It targets makers and developers who need a small interactive display for embedded projects. The hardware resolution suits simple graphical interfaces and status panels.

Gold Plated GPIO Header with Resistive Touch

The board uses an immersion gold surface finish on its connector for reliable contact with the Raspberry Pi GPIO header. Resistive touch control operates with a stylus or gloved finger, useful in workshop or outdoor environments. Drivers integrate with Raspbian, Ubuntu and Kali without kernel recompilation.

FBCP Software Enables Dual Display Output

Supplied drivers support FBCP software configuration, letting users adjust the software resolution and mirror or extend the desktop to a second HDMI monitor. An online manual details installation steps and calibration. No separate power adapter or mounting hardware is included in the package.

Helstu kostir

  • Resistive touch for direct input on a 3.5 inch 480x320 display
  • Ready-to-use drivers for Raspbian, Ubuntu and Kali systems
  • FBCP software driver enables dual-display configuration
  • Immersion gold surface plating for durable connector contacts
  • Compatible with Raspberry Pi 5, 4B, 3B, Zero and Pico boards

Tæknilýsing

Brandwaveshare
Model3.5inch RPi LCD (A)
Part Number3.5inch RPi LCD (A)

Spurningar um þessa vöru

What GPIO interface does the 3.5inch RPi LCD (A) use, and what resolution does it cap at?

The board connects through the Raspberry Pi 40-pin GPIO header and is limited to its native 480x320 hardware resolution.

What physical clearance does the 3.5inch RPi LCD (A) need to sit on a Raspberry Pi?

It aligns with the standard 40-pin header and matches the footprint of Pi B+, 2B, 3B, 3B+ and 4B boards, so no extra mounting holes or spacers are required.

How is the 3.5inch RPi LCD (A) set up on a fresh Raspberry Pi OS image, and which step is commonly missed?

Enable the SPI interface in raspi-config, then run the vendor’s driver install script; the step most people skip is rebooting after enabling SPI before launching the installer.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.