Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular green circuit board with black metal heatsink attached

KINGSMAN GAMING

KINGSMAN GAMING KE680 2TB internal SSD with Heatsink

SKU CH-Q6S9-ZGDY9

A 2TB NVMe drive with a heatsink delivering up to 7400 MBps read and 6600 MBps write speeds for PC and PS5

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Capacity2TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe

Options 2TB

  • Sequential reads up to 7,400 MB/s accelerate game loading
  • Sequential writes up to 6,600 MB/s speed large file transfers
  • 1,400 TBW endurance rating supports heavy write workloads
  • 1,500,000-hour MTBF indicates long-term reliability
  • Integrated heatsink maintains performance during sustained use

Kingsman KE680 2TB NVMe SSD

The Kingsman KE680 is a 2TB internal solid-state drive built for consumer PCs and the PlayStation 5. It uses 3D NAND TLC memory and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive ships with a pre-fitted heatsink for thermal management.

PCIe 4.0 x4 sequential performance

Sequential read reaches up to 7400 MBps and sequential write up to 6600 MBps over the PCIe 4.0 x4 link. These figures determine whether the drive meets the throughput needs of a given platform or workload. Endurance is rated at 1400 TBW with an MTBF of 1500000 hours.

Heatsink thermal management

The included heatsink is designed to dissipate heat during sustained transfers, keeping the controller and NAND within safe operating temperatures. NVMe 2.0 support contributes to lower latency and reduced power consumption under typical workloads. The drive is listed as compatible with PS5 expansion slots.

Helstu kostir

  • Sequential reads up to 7,400 MB/s accelerate game loading
  • Sequential writes up to 6,600 MB/s speed large file transfers
  • 1,400 TBW endurance rating supports heavy write workloads
  • 1,500,000-hour MTBF indicates long-term reliability
  • Integrated heatsink maintains performance during sustained use

Tæknilýsing

BrandAITC KINGSMAN
SeriesKE680
ModelAIKE680M2TB228
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Capacity2TB
Memory Components3D NAND TLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe
Max Sequential ReadUp to 7400 MBps
Max Sequential WriteUp to 6600 MBps
Terabytes Written (TBW)1400TB
MTBF1,500,000 hours
HeatSinkwith HeatSink

Aðrar útgáfur af þessari vöru

2 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this drive fit my PS5 without removing the heatsink?

The drive includes an integrated heatsink and the supplier confirms compatibility with PS5. Check your console's M.2 slot clearance to ensure the heatsink height is acceptable.

What does the 1400 TBW rating mean for daily use?

The drive is rated for 1400 terabytes written, indicating its total endurance over the warranted lifetime.

My motherboard only has PCIe 3.0 slots; will this NVMe drive work?

Yes, the PCIe 4.0 x4 NVMe drive is backward compatible with PCIe 3.0 slots, though speeds will be limited to the slot's maximum bandwidth.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.