Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular green circuit board with black metal heatsink attached

KINGSMAN GAMING

KINGSMAN GAMING KE680 2TB internal SSD with Heatsink

SKU CH-Q6S9-ZGDY9

A 2TB NVMe drive with a heatsink delivering up to 7400 MBps read and 6600 MBps write speeds for PC and PS5

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Capacity2TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe

Options 2TB

  • Sequential reads up to 7,400 MB/s accelerate game loading
  • Sequential writes up to 6,600 MB/s speed large file transfers
  • 1,400 TBW endurance rating supports heavy write workloads
  • 1,500,000-hour MTBF indicates long-term reliability
  • Integrated heatsink maintains performance during sustained use

Kingsman KE680 2TB NVMe SSD

The Kingsman KE680 is a 2TB internal solid-state drive built for consumer PCs and the PlayStation 5. It uses 3D NAND TLC memory and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive ships with a pre-fitted heatsink for thermal management.

PCIe 4.0 x4 sequential performance

Sequential read reaches up to 7400 MBps and sequential write up to 6600 MBps over the PCIe 4.0 x4 link. These figures determine whether the drive meets the throughput needs of a given platform or workload. Endurance is rated at 1400 TBW with an MTBF of 1500000 hours.

Heatsink thermal management

The included heatsink is designed to dissipate heat during sustained transfers, keeping the controller and NAND within safe operating temperatures. NVMe 2.0 support contributes to lower latency and reduced power consumption under typical workloads. The drive is listed as compatible with PS5 expansion slots.

Kohokohdat

  • Sequential reads up to 7,400 MB/s accelerate game loading
  • Sequential writes up to 6,600 MB/s speed large file transfers
  • 1,400 TBW endurance rating supports heavy write workloads
  • 1,500,000-hour MTBF indicates long-term reliability
  • Integrated heatsink maintains performance during sustained use

Tekniset tiedot

BrandAITC KINGSMAN
SeriesKE680
ModelAIKE680M2TB228
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Capacity2TB
Memory Components3D NAND TLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe
Max Sequential ReadUp to 7400 MBps
Max Sequential WriteUp to 6600 MBps
Terabytes Written (TBW)1400TB
MTBF1,500,000 hours
HeatSinkwith HeatSink

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this drive fit my PS5 without removing the heatsink?

The drive includes an integrated heatsink and the supplier confirms compatibility with PS5. Check your console's M.2 slot clearance to ensure the heatsink height is acceptable.

What does the 1400 TBW rating mean for daily use?

The drive is rated for 1400 terabytes written, indicating its total endurance over the warranted lifetime.

My motherboard only has PCIe 3.0 slots; will this NVMe drive work?

Yes, the PCIe 4.0 x4 NVMe drive is backward compatible with PCIe 3.0 slots, though speeds will be limited to the slot's maximum bandwidth.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.