Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular green circuit board with black metal heatsink attached

KINGSMAN GAMING

KINGSMAN GAMING KE680 2TB internal SSD with Heatsink

SKU CH-Q6S9-ZGDY9

A 2TB NVMe drive with a heatsink delivering up to 7400 MBps read and 6600 MBps write speeds for PC and PS5

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Capacity2TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe

Options 2TB

  • Sequential reads up to 7,400 MB/s accelerate game loading
  • Sequential writes up to 6,600 MB/s speed large file transfers
  • 1,400 TBW endurance rating supports heavy write workloads
  • 1,500,000-hour MTBF indicates long-term reliability
  • Integrated heatsink maintains performance during sustained use

Kingsman KE680 2TB NVMe SSD

The Kingsman KE680 is a 2TB internal solid-state drive built for consumer PCs and the PlayStation 5. It uses 3D NAND TLC memory and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive ships with a pre-fitted heatsink for thermal management.

PCIe 4.0 x4 sequential performance

Sequential read reaches up to 7400 MBps and sequential write up to 6600 MBps over the PCIe 4.0 x4 link. These figures determine whether the drive meets the throughput needs of a given platform or workload. Endurance is rated at 1400 TBW with an MTBF of 1500000 hours.

Heatsink thermal management

The included heatsink is designed to dissipate heat during sustained transfers, keeping the controller and NAND within safe operating temperatures. NVMe 2.0 support contributes to lower latency and reduced power consumption under typical workloads. The drive is listed as compatible with PS5 expansion slots.

Přednosti

  • Sequential reads up to 7,400 MB/s accelerate game loading
  • Sequential writes up to 6,600 MB/s speed large file transfers
  • 1,400 TBW endurance rating supports heavy write workloads
  • 1,500,000-hour MTBF indicates long-term reliability
  • Integrated heatsink maintains performance during sustained use

Specifikace

BrandAITC KINGSMAN
SeriesKE680
ModelAIKE680M2TB228
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Capacity2TB
Memory Components3D NAND TLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe
Max Sequential ReadUp to 7400 MBps
Max Sequential WriteUp to 6600 MBps
Terabytes Written (TBW)1400TB
MTBF1,500,000 hours
HeatSinkwith HeatSink

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this drive fit my PS5 without removing the heatsink?

The drive includes an integrated heatsink and the supplier confirms compatibility with PS5. Check your console's M.2 slot clearance to ensure the heatsink height is acceptable.

What does the 1400 TBW rating mean for daily use?

The drive is rated for 1400 terabytes written, indicating its total endurance over the warranted lifetime.

My motherboard only has PCIe 3.0 slots; will this NVMe drive work?

Yes, the PCIe 4.0 x4 NVMe drive is backward compatible with PCIe 3.0 slots, though speeds will be limited to the slot's maximum bandwidth.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.