Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green circuit boards with gold contacts and black chips

Kingston Technology Corp.

Kingston Technology Corp. KTA-MB1066K2/4G 4GB (2 x 2GB) DDR3 1066 SO-DIMM memory upgrade

SKU CH-66V4-G1Q9N MPN KTA-MB1066K2/4G

A 4 GB dual-channel DDR3 1066 SO-DIMM kit for Apple notebooks, supplied as two 2 GB modules with 204-pin layout, CAS latency 7 and 1.5 V operation

  • Type204-Pin DDR3 SO-DIMM
  • CompatibilityFor Apple Notebook
  • Capacity4GB (2 x 2GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS Latency7
  • Voltage1.5V
  • 4GB kit upgrades Apple notebook memory capacity
  • DDR3 1066 speed matches system specification
  • CAS latency 7 supports responsive operation
  • 204-pin SO-DIMM form factor fits compatible slots
  • 5V voltage aligns with notebook power design

Apple Notebook DDR3 Kit

This kit supplies 4 GB of DDR3 memory in two 2 GB SO-DIMM modules built for Apple notebooks. Each stick runs at 1066 MHz with a CAS latency of 7 and operates at the standard 1.5 V. The 204-pin form factor matches the slots used in compatible Mac models. It is a straightforward capacity upgrade for owners of those machines.

Dual-Channel 204-Pin Upgrade

Installing the pair activates dual-channel mode on supported logic boards, which increases memory bandwidth without requiring extra slots. The modules need no heat spreader and draw power only from the SO-DIMM socket. Builders simply insert both sticks into the available memory bays, freeing no other resources and demanding no additional cables or cooling.

Sustained 1.5 V Operation

Under continuous workloads the memory maintains its rated 1066 MHz speed at the specified 1.5 V. The absence of a heat spreader means the modules rely on the notebook's internal airflow, which is adequate for the low-power DDR3 design. Stability is preserved through Kingston's validation process, delivering 100 percent compatibility with the target Apple systems during extended use.

Helstu kostir

  • 4GB kit upgrades Apple notebook memory capacity
  • DDR3 1066 speed matches system specification
  • CAS latency 7 supports responsive operation
  • 204-pin SO-DIMM form factor fits compatible slots
  • 5V voltage aligns with notebook power design

Tæknilýsing

BrandKingston
ModelKTA-MB1066K2/4G
Type204-Pin DDR3 SO-DIMM
CompatibilityFor Apple Notebook
Capacity4GB (2 x 2GB)
SpeedDDR3 1066 (PC3 8500)
CAS Latency7
Voltage1.5V
Heat SpreaderNo
Sendingarþyngd0.05 kg
Stærð sendingar171 × 95 × 13 mm

Spurningar um þessa vöru

Does the 1.5 V DDR3 1066 kit throttle under sustained load without a heat spreader?

The modules run at standard 1.5 V with CAS 7 latency and no heat spreader; thermal throttling is not typical for DDR3 1066 SO-DIMM workloads.

How much heat or noise does the 204-pin DDR3 1066 kit add when running all day?

Memory modules produce negligible heat and zero audible noise; system fan speed is unchanged by this 1.5 V kit.

Which Apple notebook models accept this 204-pin DDR3 1066 SO-DIMM kit?

Compatibility is limited to Apple notebooks that use 204-pin DDR3 1066 (PC3 8500) SO-DIMM slots; verify your model before purchase.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.