Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Kingston Technology Corp.

Kingston Technology Corp. KTA-MB1066K2/4G 4GB (2 x 2GB) DDR3 1066 SO-DIMM memory upgrade

SKU CH-66V4-G1Q9N MPN KTA-MB1066K2/4G

A 4 GB dual-channel DDR3 1066 SO-DIMM kit for Apple notebooks, supplied as two 2 GB modules with 204-pin layout, CAS latency 7 and 1.5 V operation

  • Type204-Pin DDR3 SO-DIMM
  • CompatibilityFor Apple Notebook
  • Capacity4GB (2 x 2GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS Latency7
  • Voltage1.5V
  • 4GB kit upgrades Apple notebook memory capacity
  • DDR3 1066 speed matches system specification
  • CAS latency 7 supports responsive operation
  • 204-pin SO-DIMM form factor fits compatible slots
  • 5V voltage aligns with notebook power design

Apple Notebook DDR3 Kit

This kit supplies 4 GB of DDR3 memory in two 2 GB SO-DIMM modules built for Apple notebooks. Each stick runs at 1066 MHz with a CAS latency of 7 and operates at the standard 1.5 V. The 204-pin form factor matches the slots used in compatible Mac models. It is a straightforward capacity upgrade for owners of those machines.

Dual-Channel 204-Pin Upgrade

Installing the pair activates dual-channel mode on supported logic boards, which increases memory bandwidth without requiring extra slots. The modules need no heat spreader and draw power only from the SO-DIMM socket. Builders simply insert both sticks into the available memory bays, freeing no other resources and demanding no additional cables or cooling.

Sustained 1.5 V Operation

Under continuous workloads the memory maintains its rated 1066 MHz speed at the specified 1.5 V. The absence of a heat spreader means the modules rely on the notebook's internal airflow, which is adequate for the low-power DDR3 design. Stability is preserved through Kingston's validation process, delivering 100 percent compatibility with the target Apple systems during extended use.

Kohokohdat

  • 4GB kit upgrades Apple notebook memory capacity
  • DDR3 1066 speed matches system specification
  • CAS latency 7 supports responsive operation
  • 204-pin SO-DIMM form factor fits compatible slots
  • 5V voltage aligns with notebook power design

Tekniset tiedot

BrandKingston
ModelKTA-MB1066K2/4G
Type204-Pin DDR3 SO-DIMM
CompatibilityFor Apple Notebook
Capacity4GB (2 x 2GB)
SpeedDDR3 1066 (PC3 8500)
CAS Latency7
Voltage1.5V
Heat SpreaderNo
Lähetyspaino0.05 kg
Pakkauksen mitat171 × 95 × 13 mm

Kysymyksiä tästä tuotteesta

Does the 1.5 V DDR3 1066 kit throttle under sustained load without a heat spreader?

The modules run at standard 1.5 V with CAS 7 latency and no heat spreader; thermal throttling is not typical for DDR3 1066 SO-DIMM workloads.

How much heat or noise does the 204-pin DDR3 1066 kit add when running all day?

Memory modules produce negligible heat and zero audible noise; system fan speed is unchanged by this 1.5 V kit.

Which Apple notebook models accept this 204-pin DDR3 1066 SO-DIMM kit?

Compatibility is limited to Apple notebooks that use 204-pin DDR3 1066 (PC3 8500) SO-DIMM slots; verify your model before purchase.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.