Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small black USB hub with four ports and a short Micro USB cable attached

MCHOSE

MCHOSE Micro USB OTG Hub 4-Port for Raspberry Pi Zero v1.3

SKU CH-RA30-H4Y6N

Adds four USB 2.0 ports to Raspberry Pi Zero v1.3 and compatible Android devices with plug-and-play operation

  • TypeUSB Hubs
  • Expands one OTG port into four USB 2.0 sockets for Raspberry Pi Zero v1.3 and W
  • Works with Android tablets and phones including Galaxy S2 S3 S4 Note and Sony Xperia models
  • USB 2.0 transfer rates up to 480 Mbps with 12 Mbps and 1.5 Mbps fallback speeds
  • Bus-powered from the host OTG port so no external power supply is required
  • Plug-and-play on Android Linux and PC with no driver installation needed

Four-Port Expansion for Pi Zero

This micro-USB OTG hub adds four USB 2.0 ports to a Raspberry Pi Zero v1.3 or Zero W. It draws all power from the host’s OTG connection so no external supply is required. Plug-and-play operation works without drivers on Linux, Android and PCs equipped with USB 2.0. The adapter also fits a range of older Android tablets and phones listed by the supplier.

Makers Needing Multiple Peripherals

Builders who want to attach a mouse, keyboard, flash drive and camera simultaneously will benefit from the four downstream ports. Projects that demand more current than the Pi Zero’s OTG port can deliver should look elsewhere, as total device current is limited to the host capability. Users requiring faster than USB 2.0 transfer rates or ports beyond the four provided will need a different solution.

Direct OTG Connection

The hub plugs straight into the Pi Zero’s micro-USB OTG socket, leaving the board’s mini-HDMI and micro-SD slots free. It supports USB 2.0 signalling at 480, 12 and 1.5 Mbps for high-speed, full-speed and low-speed devices. Because it needs no separate power cable, the arrangement keeps cabling minimal inside tight enclosures or robotics chassis.

Helstu kostir

  • Expands one OTG port into four USB 2.0 sockets for Raspberry Pi Zero v1.3 and W
  • Works with Android tablets and phones including Galaxy S2 S3 S4 Note and Sony Xperia models
  • USB 2.0 transfer rates up to 480 Mbps with 12 Mbps and 1.5 Mbps fallback speeds
  • Bus-powered from the host OTG port so no external power supply is required
  • Plug-and-play on Android Linux and PC with no driver installation needed

Tæknilýsing

TypeUSB Hubs

Spurningar um þessa vöru

What Raspberry Pi Zero model does this hub require?

It is made for the Raspberry Pi Zero v1.3 with a camera connector and the Zero W.

Can I keep using my USB 1.1 keyboard and mouse with this hub?

Yes, the hub runs at USB 2.0 speeds and also supports 1.5 Mbps low-speed devices.

How can I verify the hub is operating at full speed after I plug it in?

Check that connected devices enumerate at 480 Mbps high-speed or 12 Mbps full-speed in the host’s USB device list.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.