Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small black USB hub with four ports and a short Micro USB cable attached

MCHOSE

MCHOSE Micro USB OTG Hub 4-Port for Raspberry Pi Zero v1.3

SKU CH-RA30-H4Y6N

Adds four USB 2.0 ports to Raspberry Pi Zero v1.3 and compatible Android devices with plug-and-play operation

  • TypeUSB Hubs
  • Expands one OTG port into four USB 2.0 sockets for Raspberry Pi Zero v1.3 and W
  • Works with Android tablets and phones including Galaxy S2 S3 S4 Note and Sony Xperia models
  • USB 2.0 transfer rates up to 480 Mbps with 12 Mbps and 1.5 Mbps fallback speeds
  • Bus-powered from the host OTG port so no external power supply is required
  • Plug-and-play on Android Linux and PC with no driver installation needed

Four-Port Expansion for Pi Zero

This micro-USB OTG hub adds four USB 2.0 ports to a Raspberry Pi Zero v1.3 or Zero W. It draws all power from the host’s OTG connection so no external supply is required. Plug-and-play operation works without drivers on Linux, Android and PCs equipped with USB 2.0. The adapter also fits a range of older Android tablets and phones listed by the supplier.

Makers Needing Multiple Peripherals

Builders who want to attach a mouse, keyboard, flash drive and camera simultaneously will benefit from the four downstream ports. Projects that demand more current than the Pi Zero’s OTG port can deliver should look elsewhere, as total device current is limited to the host capability. Users requiring faster than USB 2.0 transfer rates or ports beyond the four provided will need a different solution.

Direct OTG Connection

The hub plugs straight into the Pi Zero’s micro-USB OTG socket, leaving the board’s mini-HDMI and micro-SD slots free. It supports USB 2.0 signalling at 480, 12 and 1.5 Mbps for high-speed, full-speed and low-speed devices. Because it needs no separate power cable, the arrangement keeps cabling minimal inside tight enclosures or robotics chassis.

Poudarki

  • Expands one OTG port into four USB 2.0 sockets for Raspberry Pi Zero v1.3 and W
  • Works with Android tablets and phones including Galaxy S2 S3 S4 Note and Sony Xperia models
  • USB 2.0 transfer rates up to 480 Mbps with 12 Mbps and 1.5 Mbps fallback speeds
  • Bus-powered from the host OTG port so no external power supply is required
  • Plug-and-play on Android Linux and PC with no driver installation needed

Specifikacije

TypeUSB Hubs

Vprašanja o tem izdelku

What Raspberry Pi Zero model does this hub require?

It is made for the Raspberry Pi Zero v1.3 with a camera connector and the Zero W.

Can I keep using my USB 1.1 keyboard and mouse with this hub?

Yes, the hub runs at USB 2.0 speeds and also supports 1.5 Mbps low-speed devices.

How can I verify the hub is operating at full speed after I plug it in?

Check that connected devices enumerate at 480 Mbps high-speed or 12 Mbps full-speed in the host’s USB device list.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.