Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small black USB hub with four ports and a short Micro USB cable attached

MCHOSE

MCHOSE Micro USB OTG Hub 4-Port for Raspberry Pi Zero v1.3

SKU CH-RA30-H4Y6N

Adds four USB 2.0 ports to Raspberry Pi Zero v1.3 and compatible Android devices with plug-and-play operation

  • TypeUSB Hubs
  • Expands one OTG port into four USB 2.0 sockets for Raspberry Pi Zero v1.3 and W
  • Works with Android tablets and phones including Galaxy S2 S3 S4 Note and Sony Xperia models
  • USB 2.0 transfer rates up to 480 Mbps with 12 Mbps and 1.5 Mbps fallback speeds
  • Bus-powered from the host OTG port so no external power supply is required
  • Plug-and-play on Android Linux and PC with no driver installation needed

Four-Port Expansion for Pi Zero

This micro-USB OTG hub adds four USB 2.0 ports to a Raspberry Pi Zero v1.3 or Zero W. It draws all power from the host’s OTG connection so no external supply is required. Plug-and-play operation works without drivers on Linux, Android and PCs equipped with USB 2.0. The adapter also fits a range of older Android tablets and phones listed by the supplier.

Makers Needing Multiple Peripherals

Builders who want to attach a mouse, keyboard, flash drive and camera simultaneously will benefit from the four downstream ports. Projects that demand more current than the Pi Zero’s OTG port can deliver should look elsewhere, as total device current is limited to the host capability. Users requiring faster than USB 2.0 transfer rates or ports beyond the four provided will need a different solution.

Direct OTG Connection

The hub plugs straight into the Pi Zero’s micro-USB OTG socket, leaving the board’s mini-HDMI and micro-SD slots free. It supports USB 2.0 signalling at 480, 12 and 1.5 Mbps for high-speed, full-speed and low-speed devices. Because it needs no separate power cable, the arrangement keeps cabling minimal inside tight enclosures or robotics chassis.

Kohokohdat

  • Expands one OTG port into four USB 2.0 sockets for Raspberry Pi Zero v1.3 and W
  • Works with Android tablets and phones including Galaxy S2 S3 S4 Note and Sony Xperia models
  • USB 2.0 transfer rates up to 480 Mbps with 12 Mbps and 1.5 Mbps fallback speeds
  • Bus-powered from the host OTG port so no external power supply is required
  • Plug-and-play on Android Linux and PC with no driver installation needed

Tekniset tiedot

TypeUSB Hubs

Kysymyksiä tästä tuotteesta

What Raspberry Pi Zero model does this hub require?

It is made for the Raspberry Pi Zero v1.3 with a camera connector and the Zero W.

Can I keep using my USB 1.1 keyboard and mouse with this hub?

Yes, the hub runs at USB 2.0 speeds and also supports 1.5 Mbps low-speed devices.

How can I verify the hub is operating at full speed after I plug it in?

Check that connected devices enumerate at 480 Mbps high-speed or 12 Mbps full-speed in the host’s USB device list.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.