Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR5 RDIMM modules, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-DTBG-FMG58

A 192 GB DDR5-5600 kit of two 96 GB registered ECC RDIMMs at CL46 and 1.1 V for the Supermicro H14DSH motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Sjá 30 stillingar til viðbótar
  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the board's voltage requirement for stable full-population use
  • Exact-fit 288-pin kit validated for Supermicro H14DSH motherboard compatibility

Capacity and fit

This 192 GB kit contains two 96 GB DDR5 registered ECC RDIMMs built for the Supermicro H14DSH motherboard. The modules match the board's 288 pin registered form factor and population rules so the system recognises the full capacity at rated speed.

Decisive specification

The kit runs at DDR5 5600 with CL46 latency at 1.10 V in a 2Rx4 organisation. These exact timing, voltage and rank parameters are what the server memory controller expects for stable operation at full population.

Thermals and power

The modules operate at the standard 1.1 V DDR5 voltage without a heat spreader, relying on normal chassis airflow. Registered buffering reduces electrical load on the memory controller while ECC corrects single bit errors during continuous server workloads.

Helstu kostir

  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the board's voltage requirement for stable full-population use
  • Exact-fit 288-pin kit validated for Supermicro H14DSH motherboard compatibility

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How does the 5600 MT/s speed behave once installed in a Supermicro H14DSH?

The kit runs at DDR5-5600 (PC5-44800) with CL46 latency at 1.1 V, matching the controller's rated profile so all 192 GB operate at full speed.

What does the 288-pin RDIMM interface limit in this server?

The registered 288-pin DDR5 RDIMM form factor is required by the H14DSH; it will not accept UDIMM or SODIMM modules.

What physical clearance does the 2x96 GB kit need inside the chassis?

Two standard-height 288-pin RDIMMs with no heat spreader fit the board's DIMM slots; verify slot population order in the manual.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.