暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-DTBG-FMG58

A 192 GB DDR5-5600 kit of two 96 GB registered ECC RDIMMs at CL46 and 1.1 V for the Supermicro H14DSH motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

他に 30点の構成を表示
  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the board's voltage requirement for stable full-population use
  • Exact-fit 288-pin kit validated for Supermicro H14DSH motherboard compatibility

Capacity and fit

This 192 GB kit contains two 96 GB DDR5 registered ECC RDIMMs built for the Supermicro H14DSH motherboard. The modules match the board's 288 pin registered form factor and population rules so the system recognises the full capacity at rated speed.

Decisive specification

The kit runs at DDR5 5600 with CL46 latency at 1.10 V in a 2Rx4 organisation. These exact timing, voltage and rank parameters are what the server memory controller expects for stable operation at full population.

Thermals and power

The modules operate at the standard 1.1 V DDR5 voltage without a heat spreader, relying on normal chassis airflow. Registered buffering reduces electrical load on the memory controller while ECC corrects single bit errors during continuous server workloads.

特長

  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the board's voltage requirement for stable full-population use
  • Exact-fit 288-pin kit validated for Supermicro H14DSH motherboard compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the 5600 MT/s speed behave once installed in a Supermicro H14DSH?

The kit runs at DDR5-5600 (PC5-44800) with CL46 latency at 1.1 V, matching the controller's rated profile so all 192 GB operate at full speed.

What does the 288-pin RDIMM interface limit in this server?

The registered 288-pin DDR5 RDIMM form factor is required by the H14DSH; it will not accept UDIMM or SODIMM modules.

What physical clearance does the 2x96 GB kit need inside the chassis?

Two standard-height 288-pin RDIMMs with no heat spreader fit the board's DIMM slots; verify slot population order in the manual.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。