我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-DTBG-FMG58

A 192 GB DDR5-5600 kit of two 96 GB registered ECC RDIMMs at CL46 and 1.1 V for the Supermicro H14DSH motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

顯示另外 30 款選項
  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the board's voltage requirement for stable full-population use
  • Exact-fit 288-pin kit validated for Supermicro H14DSH motherboard compatibility

Capacity and fit

This 192 GB kit contains two 96 GB DDR5 registered ECC RDIMMs built for the Supermicro H14DSH motherboard. The modules match the board's 288 pin registered form factor and population rules so the system recognises the full capacity at rated speed.

Decisive specification

The kit runs at DDR5 5600 with CL46 latency at 1.10 V in a 2Rx4 organisation. These exact timing, voltage and rank parameters are what the server memory controller expects for stable operation at full population.

Thermals and power

The modules operate at the standard 1.1 V DDR5 voltage without a heat spreader, relying on normal chassis airflow. Registered buffering reduces electrical load on the memory controller while ECC corrects single bit errors during continuous server workloads.

商品特色

  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the board's voltage requirement for stable full-population use
  • Exact-fit 288-pin kit validated for Supermicro H14DSH motherboard compatibility

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How does the 5600 MT/s speed behave once installed in a Supermicro H14DSH?

The kit runs at DDR5-5600 (PC5-44800) with CL46 latency at 1.1 V, matching the controller's rated profile so all 192 GB operate at full speed.

What does the 288-pin RDIMM interface limit in this server?

The registered 288-pin DDR5 RDIMM form factor is required by the H14DSH; it will not accept UDIMM or SODIMM modules.

What physical clearance does the 2x96 GB kit need inside the chassis?

Two standard-height 288-pin RDIMMs with no heat spreader fit the board's DIMM slots; verify slot population order in the manual.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。