我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM modules in a kit

NEMIX RAM

NEMIX RAM DDR5 5600 384GB (4x96GB) ECC RDIMM CL46 1.1V Supermicro H13DSG-OM memory upgrade

SKU CH-ZHKA-YSH22

384 GB kit of four 96 GB DDR5 5600 CL46 ECC registered RDIMMs at 1.1 V, 288-pin, validated for Supermicro H13DSG-OM

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

顯示另外 30 款選項
  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 5600 (PC5-44800) speed matching the platform's rated memory controller frequency
  • Registered ECC RDIMM with 2Rx4 organization offloads the controller and corrects single-bit errors
  • 10 V operation at CL46 latency delivers spec-compliant stability at full population
  • 288-pin form factor validated for Supermicro H13DSG-OM motherboard memory-population rules

Server Memory Kit

This 384GB kit contains four 96GB DDR5 registered ECC RDIMMs built for the Supermicro H13DSG-OM motherboard. It targets administrators upgrading dual-socket servers that require registered modules with error correction. The kit delivers the exact capacity and form factor the platform expects.

DDR5 5600 CL46

Each module runs at 5600 MT/s with a CAS latency of 46 and operates at 1.1V using a 2Rx4 organisation. The registered architecture buffers address and command signals so the memory controller can drive all four slots at the rated speed without signal degradation.

Registered ECC RDIMM

The 288-pin registered DIMMs offload electrical load from the CPU memory controller and provide on-the-fly single-bit error correction. Buyers needing unbuffered UDIMMs or non-ECC memory for workstations cannot use this kit. Verify the motherboard manual for supported population rules before installation.

商品特色

  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 5600 (PC5-44800) speed matching the platform's rated memory controller frequency
  • Registered ECC RDIMM with 2Rx4 organization offloads the controller and corrects single-bit errors
  • 10 V operation at CL46 latency delivers spec-compliant stability at full population
  • 288-pin form factor validated for Supermicro H13DSG-OM motherboard memory-population rules

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What does the 5600 speed rating mean when the kit is installed in a Supermicro H13DSG-OM?

The modules run at DDR5-5600 (PC5-44800) with CL46 latency at 1.1 V, delivering the exact data rate the motherboard's memory controller expects when all four slots are populated.

How does the registered ECC design affect usable bandwidth on this platform?

Registered buffering reduces electrical load on the memory controller so all four 96 GB DIMMs operate at the rated 5600 MT/s, while on-die ECC corrects single-bit errors without halting the system.

Will these 288-pin RDIMMs physically fit the H13DSG-OM memory slots?

Yes — the kit uses the 288-pin DDR5 RDIMM form factor required by the board; the 2Rx4 rank layout matches the motherboard's population rules for full 384 GB capacity.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。