Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM memory upgrade for Supermicro H14DST-FL

SKU CH-3GEG-7RZWE

A 192 GB DDR5 5600 CL46 ECC registered RDIMM kit with six 32 GB 2Rx8 modules at 1.1 V, validated for Supermicro H14DST-FL

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Sjá 30 stillingar til viðbótar
  • 192 GB total capacity from six 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard

192GB DDR5-5600 ECC RDIMM Kit

This 192GB kit contains six 32GB DDR5 Registered DIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. It uses 2Rx8 organisation and ECC error correction for data integrity. The modules are built with major-brand DRAM chips and the 288-pin RDIMM form factor required by the Supermicro H14DST-FL motherboard.

For Servers Needing Maximum Registered Capacity

This kit suits administrators populating all slots of a compatible Supermicro server with registered ECC memory at the board's native speed. It is not for workstations or desktops that accept only unbuffered UDIMMs, nor for systems limited to lower densities or different voltage requirements. Builders needing SODIMM or UDIMM form factors must choose a different product.

2Rx8 Registered ECC at 1.1V

The registered buffer and 2Rx8 rank structure let the memory controller drive a fully populated six-DIMM configuration at the rated 5600 MT/s. ECC corrects single-bit errors in flight. The 1.1V DDR5 voltage and 288-pin RDIMM keying are mandatory for this motherboard; modules with different voltage, rank, or form factor will not function.

Helstu kostir

  • 192 GB total capacity from six 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the six 32 GB DDR5 5600 CL46 2Rx8 RDIMMs install alongside any older DDR5 modules I keep in my Supermicro H14DST-FL?

Mixing these 2Rx8 registered ECC RDIMMs with modules of different rank, speed, voltage or latency can prevent the server from posting or force it to run at the lowest common settings; the manufacturer recommends populating all slots with this exact kit for full 192 GB capacity and rated performance.

How can I verify the kit is running at DDR5 5600 with CL46 timings and ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 5600 MT/s, CAS latency shows CL46, voltage is 1.10 V and ECC status is enabled; the operating system will also report 192 GB of registered ECC memory when fully recognised.

What exactly ships in the box and is anything else required to use the memory?

The package contains the 192 GB kit of six 32 GB DDR5 5600 CL46 1.1 V 2Rx8 288-pin ECC registered RDIMMs; no additional cables, brackets or software are needed — only a compatible Supermicro H14DST-FL motherboard with available DIMM slots.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.