我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM memory upgrade for Supermicro H14DST-FL

SKU CH-3GEG-7RZWE

A 192 GB DDR5 5600 CL46 ECC registered RDIMM kit with six 32 GB 2Rx8 modules at 1.1 V, validated for Supermicro H14DST-FL

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from six 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard

192GB DDR5-5600 ECC RDIMM Kit

This 192GB kit contains six 32GB DDR5 Registered DIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. It uses 2Rx8 organisation and ECC error correction for data integrity. The modules are built with major-brand DRAM chips and the 288-pin RDIMM form factor required by the Supermicro H14DST-FL motherboard.

For Servers Needing Maximum Registered Capacity

This kit suits administrators populating all slots of a compatible Supermicro server with registered ECC memory at the board's native speed. It is not for workstations or desktops that accept only unbuffered UDIMMs, nor for systems limited to lower densities or different voltage requirements. Builders needing SODIMM or UDIMM form factors must choose a different product.

2Rx8 Registered ECC at 1.1V

The registered buffer and 2Rx8 rank structure let the memory controller drive a fully populated six-DIMM configuration at the rated 5600 MT/s. ECC corrects single-bit errors in flight. The 1.1V DDR5 voltage and 288-pin RDIMM keying are mandatory for this motherboard; modules with different voltage, rank, or form factor will not function.

商品特色

  • 192 GB total capacity from six 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the six 32 GB DDR5 5600 CL46 2Rx8 RDIMMs install alongside any older DDR5 modules I keep in my Supermicro H14DST-FL?

Mixing these 2Rx8 registered ECC RDIMMs with modules of different rank, speed, voltage or latency can prevent the server from posting or force it to run at the lowest common settings; the manufacturer recommends populating all slots with this exact kit for full 192 GB capacity and rated performance.

How can I verify the kit is running at DDR5 5600 with CL46 timings and ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 5600 MT/s, CAS latency shows CL46, voltage is 1.10 V and ECC status is enabled; the operating system will also report 192 GB of registered ECC memory when fully recognised.

What exactly ships in the box and is anything else required to use the memory?

The package contains the 192 GB kit of six 32 GB DDR5 5600 CL46 1.1 V 2Rx8 288-pin ECC registered RDIMMs; no additional cables, brackets or software are needed — only a compatible Supermicro H14DST-FL motherboard with available DIMM slots.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。