Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM memory upgrade for Supermicro H14DST-FL

SKU CH-3GEG-7RZWE

A 192 GB DDR5 5600 CL46 ECC registered RDIMM kit with six 32 GB 2Rx8 modules at 1.1 V, validated for Supermicro H14DST-FL

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Vis 30 flere konfigurasjoner
  • 192 GB total capacity from six 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard

192GB DDR5-5600 ECC RDIMM Kit

This 192GB kit contains six 32GB DDR5 Registered DIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. It uses 2Rx8 organisation and ECC error correction for data integrity. The modules are built with major-brand DRAM chips and the 288-pin RDIMM form factor required by the Supermicro H14DST-FL motherboard.

For Servers Needing Maximum Registered Capacity

This kit suits administrators populating all slots of a compatible Supermicro server with registered ECC memory at the board's native speed. It is not for workstations or desktops that accept only unbuffered UDIMMs, nor for systems limited to lower densities or different voltage requirements. Builders needing SODIMM or UDIMM form factors must choose a different product.

2Rx8 Registered ECC at 1.1V

The registered buffer and 2Rx8 rank structure let the memory controller drive a fully populated six-DIMM configuration at the rated 5600 MT/s. ECC corrects single-bit errors in flight. The 1.1V DDR5 voltage and 288-pin RDIMM keying are mandatory for this motherboard; modules with different voltage, rank, or form factor will not function.

Høydepunkter

  • 192 GB total capacity from six 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the six 32 GB DDR5 5600 CL46 2Rx8 RDIMMs install alongside any older DDR5 modules I keep in my Supermicro H14DST-FL?

Mixing these 2Rx8 registered ECC RDIMMs with modules of different rank, speed, voltage or latency can prevent the server from posting or force it to run at the lowest common settings; the manufacturer recommends populating all slots with this exact kit for full 192 GB capacity and rated performance.

How can I verify the kit is running at DDR5 5600 with CL46 timings and ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 5600 MT/s, CAS latency shows CL46, voltage is 1.10 V and ECC status is enabled; the operating system will also report 192 GB of registered ECC memory when fully recognised.

What exactly ships in the box and is anything else required to use the memory?

The package contains the 192 GB kit of six 32 GB DDR5 5600 CL46 1.1 V 2Rx8 288-pin ECC registered RDIMMs; no additional cables, brackets or software are needed — only a compatible Supermicro H14DST-FL motherboard with available DIMM slots.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.