我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Six green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 288GB (6x48GB) 4800MHz CL40 ECC RDIMM Supermicro H14SST-G memory upgrade

SKU CH-GEWB-4BW5X

A 288 GB DDR5 server kit of six 48 GB registered ECC RDIMMs running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H14SST-G motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

顯示另外 30 款選項
  • 288 GB total capacity from six 48 GB modules for large-scale server workloads
  • DDR5 4800 MHz speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operating voltage matches the Supermicro H14SST-G motherboard specification
  • Exact-fit 288-pin DDR5 RDIMM kit validated for the Supermicro H14SST-G platform

Exact-match server memory kit

This 288GB kit consists of six 48GB DDR5 RDIMM modules rated at 4800MHz with CL40 latency and 1.1V operation. Each module uses a 2Rx8 registered ECC design that matches the Supermicro H14SST-G memory controller requirements for full-capacity recognition and rated-speed operation.

Replaces partial or mismatched population

Upgrading from a partially filled or mixed-rank configuration eliminates the bandwidth loss and instability that occur when slots run at reduced speeds or unsupported ranks. The jump is worth it when the workload demands the full 288GB address space and the error-correction protection that registered ECC provides across every populated channel.

Fits the H14SST-G DIMM layout

The 288-pin registered form factor aligns with the motherboard's slot keying and population rules, so all six modules install without clearance conflicts or voltage mismatches. Registered buffering offloads the memory controller, freeing electrical margin for sustained full-load operation while ECC corrects single-bit errors before they affect production data.

商品特色

  • 288 GB total capacity from six 48 GB modules for large-scale server workloads
  • DDR5 4800 MHz speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1 V operating voltage matches the Supermicro H14SST-G motherboard specification
  • Exact-fit 288-pin DDR5 RDIMM kit validated for the Supermicro H14SST-G platform

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will these 288-pin DDR5 RDIMMs fit the Supermicro H14SST-G motherboard slots?

Yes — the kit uses the 288-pin RDIMM form factor that the H14SST-G requires, not UDIMM or SODIMM, and the 2Rx8 rank matches the board's population rules.

What is the correct installation order for the six 48 GB modules on this board?

Consult the Supermicro H14SST-G manual for the approved DIMM population sequence; the board's memory controller expects a specific slot order when all six slots are filled.

When should the registered ECC modules be replaced in a production server?

Replace modules if ECC logs show rising correctable error counts, if the system reports uncorrectable errors, or during planned hardware refresh cycles.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。