我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 128GB 8x16GB CL40 1.1V Supermicro H14DSG-O-CPU memory upgrade

SKU CH-E4DA-7M406

Eight 16 GB DDR5 ECC registered RDIMMs at 4800 MHz CL40 1.1 V for Supermicro H14DSG-O-CPU servers

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 128 GB total capacity from eight 16 GB modules for maximum server density
  • DDR5 4800 MT/s speed matches the platform spec for full-rated throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1 V delivers the exact timing and voltage the controller expects
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU motherboard precisely

128GB DDR5-4800 ECC RDIMM kit

This 128GB kit contains eight 16GB DDR5-4800 Registered ECC RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. It targets administrators upgrading memory capacity in supported server platforms.

Verify motherboard population rules

Consult the Supermicro H14DSG-O-CPU manual for supported capacities, approved DIMM population order, and installation steps before ordering. The board requires 288-pin Registered RDIMMs; UDIMMs or SODIMMs will not fit.

Registered ECC design for full-slot stability

Registered architecture offloads the memory controller so every slot runs fully populated at rated speed, while ECC corrects single-bit errors on the fly. The modules operate at 1.1V with CL40 timing and have no heat spreaders.

商品特色

  • 128 GB total capacity from eight 16 GB modules for maximum server density
  • DDR5 4800 MT/s speed matches the platform spec for full-rated throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1 V delivers the exact timing and voltage the controller expects
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU motherboard precisely

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What comes in the 128GB kit and is anything else required to install it in a Supermicro H14DSG-O-CPU motherboard?

The kit contains eight 16GB DDR5 4800 CL40 1.1V 288-pin ECC Registered RDIMMs. No extra parts are needed; the modules match the board's registered DIMM slots and population rules.

How do I decide between this 128GB 8x16GB CL40 kit and other capacities or speeds listed for the same platform?

Choose this kit when the server requires the full 128GB at DDR5 4800 with 1Rx8 registered ECC; other kits differ in total capacity, module count, rank or latency, so match the exact spec your motherboard manual approves.

What does the DDR5 4800 CL40 rating mean once the modules are running in the H14DSG-O-CPU?

The memory controller will operate the kit at 4800 MT/s with a CAS latency of 40 cycles at 1.1V, delivering the rated bandwidth and registered ECC stability the board expects.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。