暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 128GB 8x16GB CL40 1.1V Supermicro H14DSG-O-CPU memory upgrade

SKU CH-E4DA-7M406

Eight 16 GB DDR5 ECC registered RDIMMs at 4800 MHz CL40 1.1 V for Supermicro H14DSG-O-CPU servers

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

他に 30点の構成を表示
  • 128 GB total capacity from eight 16 GB modules for maximum server density
  • DDR5 4800 MT/s speed matches the platform spec for full-rated throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1 V delivers the exact timing and voltage the controller expects
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU motherboard precisely

128GB DDR5-4800 ECC RDIMM kit

This 128GB kit contains eight 16GB DDR5-4800 Registered ECC RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. It targets administrators upgrading memory capacity in supported server platforms.

Verify motherboard population rules

Consult the Supermicro H14DSG-O-CPU manual for supported capacities, approved DIMM population order, and installation steps before ordering. The board requires 288-pin Registered RDIMMs; UDIMMs or SODIMMs will not fit.

Registered ECC design for full-slot stability

Registered architecture offloads the memory controller so every slot runs fully populated at rated speed, while ECC corrects single-bit errors on the fly. The modules operate at 1.1V with CL40 timing and have no heat spreaders.

特長

  • 128 GB total capacity from eight 16 GB modules for maximum server density
  • DDR5 4800 MT/s speed matches the platform spec for full-rated throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1 V delivers the exact timing and voltage the controller expects
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU motherboard precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the 128GB kit and is anything else required to install it in a Supermicro H14DSG-O-CPU motherboard?

The kit contains eight 16GB DDR5 4800 CL40 1.1V 288-pin ECC Registered RDIMMs. No extra parts are needed; the modules match the board's registered DIMM slots and population rules.

How do I decide between this 128GB 8x16GB CL40 kit and other capacities or speeds listed for the same platform?

Choose this kit when the server requires the full 128GB at DDR5 4800 with 1Rx8 registered ECC; other kits differ in total capacity, module count, rank or latency, so match the exact spec your motherboard manual approves.

What does the DDR5 4800 CL40 rating mean once the modules are running in the H14DSG-O-CPU?

The memory controller will operate the kit at 4800 MT/s with a CAS latency of 40 cycles at 1.1V, delivering the rated bandwidth and registered ECC stability the board expects.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。