暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules without heat spreaders in a clear tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 128GB (4x32GB) CL40 1.1V 2Rx8 Supermicro H14DST-F memory upgrade

SKU CH-9WE4-JNQWR

128GB DDR5-4800 ECC Registered RDIMM kit (4x32GB) validated for Supermicro H14DST-F servers, running at 1.1V CL40 with 2Rx8 rank for stable full-capacity operation

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

他に 30点の構成を表示
  • Exact 128 GB DDR5 4800 kit with 2Rx8 registered ECC so the H14DST-F recognises full capacity at rated speed
  • 1 V CL40 timing matches the board's memory controller for stable full-population operation
  • Registered architecture offloads the controller enabling every slot to run fully populated at 128 GB
  • ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
  • Verified 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard memory slots

System-specific DDR5 ECC RDIMM kit

This 128GB kit contains four 32GB DDR5 4800 Registered ECC modules built to the exact voltage, rank and timing the Supermicro H14DST-F memory controller expects. It is intended for administrators upgrading that specific server platform with validated, fully populated memory.

Registered 2Rx8 architecture at 1.1V

The modules use a 2Rx8 registered design that buffers address and command signals so every slot runs at the rated DDR5 4800 speed when all four DIMMs are installed. ECC corrects single-bit errors on the fly to prevent silent data corruption in production workloads.

128GB total capacity across four slots

The kit fills four DIMM sockets with 32GB each, delivering the full 128GB the board can address in this configuration. Adding further memory would require a different motherboard or a platform that supports higher-density modules.

特長

  • Exact 128 GB DDR5 4800 kit with 2Rx8 registered ECC so the H14DST-F recognises full capacity at rated speed
  • 1 V CL40 timing matches the board's memory controller for stable full-population operation
  • Registered architecture offloads the controller enabling every slot to run fully populated at 128 GB
  • ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
  • Verified 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard memory slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the DDR5-4800 rating mean once the kit is installed in a Supermicro H14DST-F?

The memory controller will recognise the modules at their rated 4800 MT/s speed, delivering the full PC5-38400 bandwidth the platform expects.

How does the 288-pin RDIMM form factor and registered design affect compatibility?

The 288-pin Registered DIMM is the exact form factor the H14DST-F requires; the buffered architecture lets all four slots run fully populated without overloading the controller.

What physical clearance does the 4-module kit need inside the chassis?

Each 32 GB module is a standard-height 288-pin RDIMM with no heat spreader, so it fits the regular DIMM slots on the H14DST-F without extra clearance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。