Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green DDR5 RDIMM modules without heat spreaders in a clear tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 128GB (4x32GB) CL40 1.1V 2Rx8 Supermicro H14DST-F memory upgrade

SKU CH-9WE4-JNQWR

128GB DDR5-4800 ECC Registered RDIMM kit (4x32GB) validated for Supermicro H14DST-F servers, running at 1.1V CL40 with 2Rx8 rank for stable full-capacity operation

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Ver as outras 30 configurações
  • Exact 128 GB DDR5 4800 kit with 2Rx8 registered ECC so the H14DST-F recognises full capacity at rated speed
  • 1 V CL40 timing matches the board's memory controller for stable full-population operation
  • Registered architecture offloads the controller enabling every slot to run fully populated at 128 GB
  • ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
  • Verified 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard memory slots

System-specific DDR5 ECC RDIMM kit

This 128GB kit contains four 32GB DDR5 4800 Registered ECC modules built to the exact voltage, rank and timing the Supermicro H14DST-F memory controller expects. It is intended for administrators upgrading that specific server platform with validated, fully populated memory.

Registered 2Rx8 architecture at 1.1V

The modules use a 2Rx8 registered design that buffers address and command signals so every slot runs at the rated DDR5 4800 speed when all four DIMMs are installed. ECC corrects single-bit errors on the fly to prevent silent data corruption in production workloads.

128GB total capacity across four slots

The kit fills four DIMM sockets with 32GB each, delivering the full 128GB the board can address in this configuration. Adding further memory would require a different motherboard or a platform that supports higher-density modules.

Pontos fortes

  • Exact 128 GB DDR5 4800 kit with 2Rx8 registered ECC so the H14DST-F recognises full capacity at rated speed
  • 1 V CL40 timing matches the board's memory controller for stable full-population operation
  • Registered architecture offloads the controller enabling every slot to run fully populated at 128 GB
  • ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
  • Verified 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard memory slots

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What does the DDR5-4800 rating mean once the kit is installed in a Supermicro H14DST-F?

The memory controller will recognise the modules at their rated 4800 MT/s speed, delivering the full PC5-38400 bandwidth the platform expects.

How does the 288-pin RDIMM form factor and registered design affect compatibility?

The 288-pin Registered DIMM is the exact form factor the H14DST-F requires; the buffered architecture lets all four slots run fully populated without overloading the controller.

What physical clearance does the 4-module kit need inside the chassis?

Each 32 GB module is a standard-height 288-pin RDIMM with no heat spreader, so it fits the regular DIMM slots on the H14DST-F without extra clearance.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.