我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 96GB 6x16GB CL40 1.1V Supermicro H14SST-G memory upgrade

SKU CH-8JFH-S1TRB

Sixteen-gigabyte registered ECC DDR5 modules in a 96 GB kit run at 4800 MT/s with CL40 timing and 1.1 V for the Supermicro H14SST-G motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G memory slots precisely

Exact-match DDR5 upgrade for Supermicro H14SST-G

This 96GB kit delivers six 16GB DDR5 4800 RDIMMs built to the motherboard's registered ECC specification. Each module runs at 1.10V with CL40 timing and 1Rx8 organization so the memory controller recognizes full capacity at rated speed without manual tuning.

Thermals noise and power in normal use

Operating at the standard DDR5 voltage of 1.10V keeps power draw low across all six slots. The registered architecture buffers address and command signals, reducing electrical load on the memory controller during sustained workloads. No heat spreaders are fitted, relying on chassis airflow for cooling.

Replaces partial or mismatched populations

The kit upgrades systems running fewer than six modules or mixed-rank DIMMs that force downclocking. Full population with matched 1Rx8 registered ECC restores maximum bandwidth and error correction across every channel. Buyers who need a different total capacity or a UDIMM form factor should verify their board's supported configurations first.

商品特色

  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G memory slots precisely

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install this 288-pin RDIMM kit in the Supermicro H14SST-G, and which step do people often get wrong?

Power down the server, open the chassis, and insert each 16 GB module into the slots listed in the motherboard manual following the exact population order; the step most often missed is seating the registered DIMM until both ejector clips click, confirming the 1.1 V signal path is fully engaged.

What maintenance or replacement will this ECC registered memory need over its service life?

No scheduled maintenance is required; the modules carry a lifetime replacement warranty, so any DIMM that develops correctable or uncorrectable errors is swapped at no cost rather than repaired.

What limit appears first when this 96 GB kit runs sustained workloads at DDR5-4800?

The registered buffer and 1Rx8 organisation keep the memory controller load low, so the first bottleneck is usually the CPU memory-controller throughput or thermal envelope, not the DRAM itself.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。