Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR4 UDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2133 PC4-17000 CL15 1.2V 288-Pin Non-ECC UDIMM desktop RAM

SKU CH-R2A6-2Z83C

A 32 GB kit of four 8 GB DDR4 2133 modules at CL15 and 1.20 V for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity from four 8 GB modules
  • DDR4 2133 speed rated at PC4-17000 bandwidth
  • CL15 latency at 1.20 V operating voltage
  • 288-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung Micron Hynix chipset

32GB DDR4 Kit for Desktop Upgrades

This NEMIX RAM kit provides 32GB of DDR4 memory across four 8GB modules. It is built for standard desktop boards that accept 288-pin unbuffered non-ECC UDIMMs. The kit targets users who need a straightforward capacity increase for everyday workloads.

Thermals and Power at Standard Voltage

Operating at 1.20V, the modules run at the standard DDR4 voltage without added heat spreaders. The CL15 latency at 2133 MT/s keeps power draw modest during typical desktop use. No active cooling is required for normal operation.

Major-OEM Chips and Simple Installation

Each module uses Samsung, Micron or Hynix components screened for stability. The 288-pin UDIMM form factor drops into compatible slots without extra cables or software. A lifetime replacement warranty backs the kit for long-term service.

Helstu kostir

  • 32 GB total capacity from four 8 GB modules
  • DDR4 2133 speed rated at PC4-17000 bandwidth
  • CL15 latency at 1.20 V operating voltage
  • 288-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung Micron Hynix chipset

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD17000-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 288-pin DDR4 UDIMM modules and what step do people often miss?

Align the notch on each 8 GB module with the motherboard slot key, press down firmly until both retention clips click, then verify in BIOS that all four sticks show at 2133 MT/s and CL15.

What maintenance or replacement will the 32 GB kit need later?

No heat spreader means dust can settle on the bare PCB; clean contacts with isopropyl alcohol if the system becomes unstable after years of use.

What limit appears first under sustained load with these 1.20 V CL15 modules?

The JEDEC-standard 1.20 V voltage ceiling restricts overclocking headroom, so extended heavy workloads hit the rated 2133 MT/s ceiling before thermals become an issue.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.