Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR4 sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2400 CL17 desktop RAM

SKU CH-ZMST-K0F8D

A 32 GB desktop memory kit of four 8 GB DDR4 modules running at 2400 MT/s with CL17 latency at 1.20 V on 288-pin unbuffered UDIMMs

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity across four 8 GB modules
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • CL17 CAS latency for responsive timing
  • 20 V operating voltage reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop slots

NEMIX RAM 32GB DDR4 2400 Kit

This 32 GB kit contains four 8 GB DDR4 UDIMM modules rated at 2400 MT/s with CL17 latency. It is built for standard desktop motherboards that accept 288-pin unbuffered non-ECC memory running at 1.2 V. The modules use major-brand DRAM from Samsung, Micron or Hynix and have no heat spreaders or lighting.

Installing 288-Pin DDR4 Modules

Align the notch on each module with the slot key and press down firmly until the retention clips click into place. Because the kit is unbuffered and non-ECC, it works in most consumer desktop boards without extra configuration. A common issue is mixing these sticks with existing modules of different speed or latency, which can prevent the system from posting.

Check Motherboard DDR4 Support Before Buying

Verify that your motherboard has four free 288-pin DDR4 slots and supports 2400 MT/s operation at 1.2 V. Confirm the board accepts non-ECC unbuffered UDIMMs and can run a 32 GB total capacity across four ranks. Consult the manual for any population rules or maximum per-slot limits that could affect this 4 x 8 GB configuration.

Helstu kostir

  • 32 GB total capacity across four 8 GB modules
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • CL17 CAS latency for responsive timing
  • 20 V operating voltage reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop slots

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I verify the kit is running at DDR4 2400 with CL17 timings after installation?

Open Task Manager or CPU-Z and confirm the memory speed reads 2400 MHz and CAS latency shows 17.

What comes in the box and is anything else required to use the 32 GB kit?

Four 8 GB 288-pin DDR4 UDIMM modules are included; no extra cables or accessories are needed.

Which capacity version should I choose for a 32 GB upgrade?

This kit is the 32 GB (4 x 8 GB) version; select it when you need exactly 32 GB in four slots.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.