Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR4 sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2400 CL17 desktop RAM

SKU CH-ZMST-K0F8D

A 32 GB desktop memory kit of four 8 GB DDR4 modules running at 2400 MT/s with CL17 latency at 1.20 V on 288-pin unbuffered UDIMMs

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity across four 8 GB modules
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • CL17 CAS latency for responsive timing
  • 20 V operating voltage reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop slots

NEMIX RAM 32GB DDR4 2400 Kit

This 32 GB kit contains four 8 GB DDR4 UDIMM modules rated at 2400 MT/s with CL17 latency. It is built for standard desktop motherboards that accept 288-pin unbuffered non-ECC memory running at 1.2 V. The modules use major-brand DRAM from Samsung, Micron or Hynix and have no heat spreaders or lighting.

Installing 288-Pin DDR4 Modules

Align the notch on each module with the slot key and press down firmly until the retention clips click into place. Because the kit is unbuffered and non-ECC, it works in most consumer desktop boards without extra configuration. A common issue is mixing these sticks with existing modules of different speed or latency, which can prevent the system from posting.

Check Motherboard DDR4 Support Before Buying

Verify that your motherboard has four free 288-pin DDR4 slots and supports 2400 MT/s operation at 1.2 V. Confirm the board accepts non-ECC unbuffered UDIMMs and can run a 32 GB total capacity across four ranks. Consult the manual for any population rules or maximum per-slot limits that could affect this 4 x 8 GB configuration.

Pluspunten

  • 32 GB total capacity across four 8 GB modules
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • CL17 CAS latency for responsive timing
  • 20 V operating voltage reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop slots

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I verify the kit is running at DDR4 2400 with CL17 timings after installation?

Open Task Manager or CPU-Z and confirm the memory speed reads 2400 MHz and CAS latency shows 17.

What comes in the box and is anything else required to use the 32 GB kit?

Four 8 GB 288-pin DDR4 UDIMM modules are included; no extra cables or accessories are needed.

Which capacity version should I choose for a 32 GB upgrade?

This kit is the 32 GB (4 x 8 GB) version; select it when you need exactly 32 GB in four slots.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.