NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 ECC SODIMM 1.2V 260-pin
- 16GB (2 x 8GB)
- 260-Pin DDR4 SO-DIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
NEMIX RAM
A dual-channel 16 GB DDR4 ECC SODIMM kit running at 2933 MT/s with CL21 latency and 1.20 V operation
Capacity 16GB (2 x 8GB)
This 16GB kit contains two 8GB DDR4 ECC SODIMM modules built for laptops, all-in-one PCs, NAS devices and small-form-factor workstations that require error-correcting memory. It is not for buyers who need non-ECC modules or desktop DIMMs.
The single specification that decides fit is the DDR4 2933 CL21 ECC unbuffered profile at 1.2V; the motherboard must accept 260-pin ECC SODIMMs at this exact speed and latency or the system will not post.
Installation is a standard SODIMM slot insertion that takes minutes, but the most frequent problem is a BIOS that disables ECC or refuses unbuffered ECC modules, so verify the firmware setting before assuming the memory is faulty.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered SODIMM Memory |
| Part Number | MSE23400-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The modules run at DDR4 2933 (PC4-23400) with CL21 latency and 1.20 V, delivering the rated throughput provided the platform supports that frequency.
This kit uses a 260-pin DDR4 ECC unbuffered SODIMM interface; it fits only slots wired for ECC unbuffered operation and will not work in non-ECC or registered-only sockets.
Each module is a standard 260-pin SODIMM with no heat spreader, so two adjacent SODIMM slots are needed and low-profile clearance is sufficient.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?