NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 ECC SODIMM 1.2V 260-pin
- 16GB (2 x 8GB)
- 260-Pin DDR4 SO-DIMM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
NEMIX RAM
A dual-channel 16 GB DDR4 ECC SODIMM kit running at 2933 MT/s with CL21 latency and 1.20 V operation
Capacity 16GB (2 x 8GB)
This 16GB kit contains two 8GB DDR4 ECC SODIMM modules built for laptops, all-in-one PCs, NAS devices and small-form-factor workstations that require error-correcting memory. It is not for buyers who need non-ECC modules or desktop DIMMs.
The single specification that decides fit is the DDR4 2933 CL21 ECC unbuffered profile at 1.2V; the motherboard must accept 260-pin ECC SODIMMs at this exact speed and latency or the system will not post.
Installation is a standard SODIMM slot insertion that takes minutes, but the most frequent problem is a BIOS that disables ECC or refuses unbuffered ECC modules, so verify the firmware setting before assuming the memory is faulty.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered SODIMM Memory |
| Part Number | MSE23400-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The modules run at DDR4 2933 (PC4-23400) with CL21 latency and 1.20 V, delivering the rated throughput provided the platform supports that frequency.
This kit uses a 260-pin DDR4 ECC unbuffered SODIMM interface; it fits only slots wired for ECC unbuffered operation and will not work in non-ECC or registered-only sockets.
Each module is a standard 260-pin SODIMM with no heat spreader, so two adjacent SODIMM slots are needed and low-profile clearance is sufficient.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม