NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 ECC SODIMM 1.2V 260-pin
- 16GB (2 x 8GB)
- 260-Pin DDR4 SO-DIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A dual-channel 16 GB DDR4 ECC SODIMM kit running at 2933 MT/s with CL21 latency and 1.20 V operation
Capacity 16GB (2 x 8GB)
This 16GB kit contains two 8GB DDR4 ECC SODIMM modules built for laptops, all-in-one PCs, NAS devices and small-form-factor workstations that require error-correcting memory. It is not for buyers who need non-ECC modules or desktop DIMMs.
The single specification that decides fit is the DDR4 2933 CL21 ECC unbuffered profile at 1.2V; the motherboard must accept 260-pin ECC SODIMMs at this exact speed and latency or the system will not post.
Installation is a standard SODIMM slot insertion that takes minutes, but the most frequent problem is a BIOS that disables ECC or refuses unbuffered ECC modules, so verify the firmware setting before assuming the memory is faulty.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered SODIMM Memory |
| Part Number | MSE23400-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The modules run at DDR4 2933 (PC4-23400) with CL21 latency and 1.20 V, delivering the rated throughput provided the platform supports that frequency.
This kit uses a 260-pin DDR4 ECC unbuffered SODIMM interface; it fits only slots wired for ECC unbuffered operation and will not work in non-ECC or registered-only sockets.
Each module is a standard 260-pin SODIMM with no heat spreader, so two adjacent SODIMM slots are needed and low-profile clearance is sufficient.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?