Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2133 PC4-17000 CL15 1.2V 288-Pin Non-ECC UDIMM desktop RAM

SKU CH-R2A6-2Z83C

A 32 GB kit of four 8 GB DDR4 2133 modules at CL15 and 1.20 V for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity from four 8 GB modules
  • DDR4 2133 speed rated at PC4-17000 bandwidth
  • CL15 latency at 1.20 V operating voltage
  • 288-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung Micron Hynix chipset

32GB DDR4 Kit for Desktop Upgrades

This NEMIX RAM kit provides 32GB of DDR4 memory across four 8GB modules. It is built for standard desktop boards that accept 288-pin unbuffered non-ECC UDIMMs. The kit targets users who need a straightforward capacity increase for everyday workloads.

Thermals and Power at Standard Voltage

Operating at 1.20V, the modules run at the standard DDR4 voltage without added heat spreaders. The CL15 latency at 2133 MT/s keeps power draw modest during typical desktop use. No active cooling is required for normal operation.

Major-OEM Chips and Simple Installation

Each module uses Samsung, Micron or Hynix components screened for stability. The 288-pin UDIMM form factor drops into compatible slots without extra cables or software. A lifetime replacement warranty backs the kit for long-term service.

Punti di forza

  • 32 GB total capacity from four 8 GB modules
  • DDR4 2133 speed rated at PC4-17000 bandwidth
  • CL15 latency at 1.20 V operating voltage
  • 288-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung Micron Hynix chipset

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD17000-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install the 288-pin DDR4 UDIMM modules and what step do people often miss?

Align the notch on each 8 GB module with the motherboard slot key, press down firmly until both retention clips click, then verify in BIOS that all four sticks show at 2133 MT/s and CL15.

What maintenance or replacement will the 32 GB kit need later?

No heat spreader means dust can settle on the bare PCB; clean contacts with isopropyl alcohol if the system becomes unstable after years of use.

What limit appears first under sustained load with these 1.20 V CL15 modules?

The JEDEC-standard 1.20 V voltage ceiling restricts overclocking headroom, so extended heavy workloads hit the rated 2133 MT/s ceiling before thermals become an issue.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.