NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 ECC SODIMM 1.2V 260-pin
- 16GB (2 x 8GB)
- 260-Pin DDR4 SO-DIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
NEMIX RAM
A dual-channel 16 GB DDR4 ECC SODIMM kit running at 2933 MT/s with CL21 latency and 1.20 V operation
Capacity 16GB (2 x 8GB)
This 16GB kit contains two 8GB DDR4 ECC SODIMM modules built for laptops, all-in-one PCs, NAS devices and small-form-factor workstations that require error-correcting memory. It is not for buyers who need non-ECC modules or desktop DIMMs.
The single specification that decides fit is the DDR4 2933 CL21 ECC unbuffered profile at 1.2V; the motherboard must accept 260-pin ECC SODIMMs at this exact speed and latency or the system will not post.
Installation is a standard SODIMM slot insertion that takes minutes, but the most frequent problem is a BIOS that disables ECC or refuses unbuffered ECC modules, so verify the firmware setting before assuming the memory is faulty.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered SODIMM Memory |
| Part Number | MSE23400-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The modules run at DDR4 2933 (PC4-23400) with CL21 latency and 1.20 V, delivering the rated throughput provided the platform supports that frequency.
This kit uses a 260-pin DDR4 ECC unbuffered SODIMM interface; it fits only slots wired for ECC unbuffered operation and will not work in non-ECC or registered-only sockets.
Each module is a standard 260-pin SODIMM with no heat spreader, so two adjacent SODIMM slots are needed and low-profile clearance is sufficient.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?