Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR4 sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2400 CL17 desktop RAM

SKU CH-ZMST-K0F8D

A 32 GB desktop memory kit of four 8 GB DDR4 modules running at 2400 MT/s with CL17 latency at 1.20 V on 288-pin unbuffered UDIMMs

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity across four 8 GB modules
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • CL17 CAS latency for responsive timing
  • 20 V operating voltage reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop slots

NEMIX RAM 32GB DDR4 2400 Kit

This 32 GB kit contains four 8 GB DDR4 UDIMM modules rated at 2400 MT/s with CL17 latency. It is built for standard desktop motherboards that accept 288-pin unbuffered non-ECC memory running at 1.2 V. The modules use major-brand DRAM from Samsung, Micron or Hynix and have no heat spreaders or lighting.

Installing 288-Pin DDR4 Modules

Align the notch on each module with the slot key and press down firmly until the retention clips click into place. Because the kit is unbuffered and non-ECC, it works in most consumer desktop boards without extra configuration. A common issue is mixing these sticks with existing modules of different speed or latency, which can prevent the system from posting.

Check Motherboard DDR4 Support Before Buying

Verify that your motherboard has four free 288-pin DDR4 slots and supports 2400 MT/s operation at 1.2 V. Confirm the board accepts non-ECC unbuffered UDIMMs and can run a 32 GB total capacity across four ranks. Consult the manual for any population rules or maximum per-slot limits that could affect this 4 x 8 GB configuration.

Kohokohdat

  • 32 GB total capacity across four 8 GB modules
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • CL17 CAS latency for responsive timing
  • 20 V operating voltage reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop slots

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the kit is running at DDR4 2400 with CL17 timings after installation?

Open Task Manager or CPU-Z and confirm the memory speed reads 2400 MHz and CAS latency shows 17.

What comes in the box and is anything else required to use the 32 GB kit?

Four 8 GB 288-pin DDR4 UDIMM modules are included; no extra cables or accessories are needed.

Which capacity version should I choose for a 32 GB upgrade?

This kit is the 32 GB (4 x 8 GB) version; select it when you need exactly 32 GB in four slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.