Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

NEMIX RAM

NEMIX RAM 8GB (4x2GB) DDR2 667 PC2-5300 desktop RAM

SKU CH-RVSG-3ZESK

A 8GB kit of four 2GB DDR2 667 PC2-5300 unbuffered UDIMMs running at 1.8V for older desktop upgrades

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR2 UDIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 8GB (4 x 2GB)

  • 8 GB kit enables smooth multitasking with four matched 2 GB modules
  • DDR2 667 MHz speed rated at PC2-5300 for responsive data throughput
  • CL5 latency at 1.8 V keeps timing tight and power draw low
  • 240-pin unbuffered non-ECC design fits standard desktop motherboards
  • Modules built with Samsung, Micron or Hynix chips and stress-tested for reliability

Kit composition and target systems

This kit contains four 2 GB modules for a total of 8 GB of DDR2 667 memory. It is intended for desktop PCs that accept 240-pin unbuffered non-ECC UDIMMs running at 1.8 V.

Who this suits and who it does not

It suits owners of older workstations or office PCs that specify PC2-5300 CL5 modules and have four available slots. It does not suit systems that require registered or ECC memory, nor boards limited to lower densities per slot.

Deciding specification

The modules run at DDR2 667 with a CL5 latency at 1.80 V, so the motherboard must support that exact speed, timing and voltage combination for the kit to operate correctly.

Helstu kostir

  • 8 GB kit enables smooth multitasking with four matched 2 GB modules
  • DDR2 667 MHz speed rated at PC2-5300 for responsive data throughput
  • CL5 latency at 1.8 V keeps timing tight and power draw low
  • 240-pin unbuffered non-ECC design fits standard desktop motherboards
  • Modules built with Samsung, Micron or Hynix chips and stress-tested for reliability

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM DDR2 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR2 Desktop PC Memory Solutions
Part NumberMD5300-228K4
Capacity8GB (4 x 2GB)
Type240-Pin DDR2 UDIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR2 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this 8 GB kit work in a board that only has two DDR2 slots?

The kit contains four 2 GB modules, so it requires four free 240-pin slots to install the full 8 GB.

Is the memory compatible with systems that need ECC or registered DIMMs?

These modules are non-ECC and unbuffered, so they will not work in platforms that require ECC or registered memory.

What voltage do the modules run at and is it standard for DDR2?

Each module operates at 1.80 V, which is the standard voltage for DDR2 desktop memory.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.