Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM 8GB (4x2GB) DDR2 667 PC2-5300 desktop RAM

SKU CH-RVSG-3ZESK

A 8GB kit of four 2GB DDR2 667 PC2-5300 unbuffered UDIMMs running at 1.8V for older desktop upgrades

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR2 UDIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 8GB (4 x 2GB)

  • 8 GB kit enables smooth multitasking with four matched 2 GB modules
  • DDR2 667 MHz speed rated at PC2-5300 for responsive data throughput
  • CL5 latency at 1.8 V keeps timing tight and power draw low
  • 240-pin unbuffered non-ECC design fits standard desktop motherboards
  • Modules built with Samsung, Micron or Hynix chips and stress-tested for reliability

Kit composition and target systems

This kit contains four 2 GB modules for a total of 8 GB of DDR2 667 memory. It is intended for desktop PCs that accept 240-pin unbuffered non-ECC UDIMMs running at 1.8 V.

Who this suits and who it does not

It suits owners of older workstations or office PCs that specify PC2-5300 CL5 modules and have four available slots. It does not suit systems that require registered or ECC memory, nor boards limited to lower densities per slot.

Deciding specification

The modules run at DDR2 667 with a CL5 latency at 1.80 V, so the motherboard must support that exact speed, timing and voltage combination for the kit to operate correctly.

Pluspunten

  • 8 GB kit enables smooth multitasking with four matched 2 GB modules
  • DDR2 667 MHz speed rated at PC2-5300 for responsive data throughput
  • CL5 latency at 1.8 V keeps timing tight and power draw low
  • 240-pin unbuffered non-ECC design fits standard desktop motherboards
  • Modules built with Samsung, Micron or Hynix chips and stress-tested for reliability

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR2 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR2 Desktop PC Memory Solutions
Part NumberMD5300-228K4
Capacity8GB (4 x 2GB)
Type240-Pin DDR2 UDIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR2 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this 8 GB kit work in a board that only has two DDR2 slots?

The kit contains four 2 GB modules, so it requires four free 240-pin slots to install the full 8 GB.

Is the memory compatible with systems that need ECC or registered DIMMs?

These modules are non-ECC and unbuffered, so they will not work in platforms that require ECC or registered memory.

What voltage do the modules run at and is it standard for DDR2?

Each module operates at 1.80 V, which is the standard voltage for DDR2 desktop memory.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.