NEMIX RAM 4GB (2x2GB) DDR2 667 desktop RAM
- 4GB (2 x 2GB)
- 240-Pin DDR2 UDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
NEMIX RAM
A four-module kit provides 8 GB of DDR2 800 desktop memory at CL6 latency and 1.8 V
Capacity 8GB (4 x 2GB)
This NEMIX RAM kit provides 8 GB of desktop memory across four 2 GB modules. It uses the DDR2 800 standard, also labelled PC2-6400, with a CAS latency of CL6 and a default voltage of 1.8 V. The sticks are 240-pin unbuffered UDIMMs without ECC or heat spreaders.
The kit suits older desktop motherboards that accept DDR2 UDIMMs and can run at 800 MHz with 1.8 V operation. Builders repairing or upgrading legacy workstations or basic office PCs will find it a direct match. Systems that require registered or ECC memory, or boards limited to slower DDR2 speeds, should look elsewhere.
The decisive figure is the DDR2 800 (PC2-6400) speed rating combined with CL6 timing at 1.8 V. If the motherboard specifies this exact speed and voltage the kit will slot in and run at its rated settings without further adjustment.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR2 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR2 Desktop PC Memory Solutions |
| Part Number | MD6400-228K4 |
| Capacity | 8GB (4 x 2GB) |
| Type | 240-Pin DDR2 UDIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR2 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The kit uses the standard 240-pin DDR2 UDIMM form factor, so it fits any desktop board with DDR2 DIMM slots.
Open the retention clips, align the notch on each module with the slot key, press down firmly until both clips snap shut, then verify all four are fully latched.
DDR2 memory has no moving parts and no wear cycle; it typically runs for the life of the system unless physically damaged or a voltage fault occurs.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?