NEMIX RAM 4GB (2x2GB) DDR2 667 desktop RAM
- 4GB (2 x 2GB)
- 240-Pin DDR2 UDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A four-module kit provides 8 GB of DDR2 800 desktop memory at CL6 latency and 1.8 V
Capacity 8GB (4 x 2GB)
This NEMIX RAM kit provides 8 GB of desktop memory across four 2 GB modules. It uses the DDR2 800 standard, also labelled PC2-6400, with a CAS latency of CL6 and a default voltage of 1.8 V. The sticks are 240-pin unbuffered UDIMMs without ECC or heat spreaders.
The kit suits older desktop motherboards that accept DDR2 UDIMMs and can run at 800 MHz with 1.8 V operation. Builders repairing or upgrading legacy workstations or basic office PCs will find it a direct match. Systems that require registered or ECC memory, or boards limited to slower DDR2 speeds, should look elsewhere.
The decisive figure is the DDR2 800 (PC2-6400) speed rating combined with CL6 timing at 1.8 V. If the motherboard specifies this exact speed and voltage the kit will slot in and run at its rated settings without further adjustment.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR2 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR2 Desktop PC Memory Solutions |
| Part Number | MD6400-228K4 |
| Capacity | 8GB (4 x 2GB) |
| Type | 240-Pin DDR2 UDIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR2 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The kit uses the standard 240-pin DDR2 UDIMM form factor, so it fits any desktop board with DDR2 DIMM slots.
Open the retention clips, align the notch on each module with the slot key, press down firmly until both clips snap shut, then verify all four are fully latched.
DDR2 memory has no moving parts and no wear cycle; it typically runs for the life of the system unless physically damaged or a voltage fault occurs.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?