We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR2 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 8GB (4x2GB) DDR2 800 PC2-6400 CL6 1.8V 240-Pin UDIMM desktop RAM

SKU CH-55M1-V57NY

A four-module kit provides 8 GB of DDR2 800 desktop memory at CL6 latency and 1.8 V

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR2 UDIMM
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Voltage1.80V
  • ECCNo

Capacity 8GB (4 x 2GB)

  • 8GB kit expands multitasking headroom with four 2GB modules
  • DDR2 800 PC2-6400 speed matches legacy motherboard specifications
  • CL6 latency at 1.80V keeps timing tight for stable throughput
  • 240-pin UDIMM form factor drops straight into compatible desktop slots
  • Major-brand Samsung, Micron or Hynix chips deliver validated reliability

Kit Composition

This NEMIX RAM kit provides 8 GB of desktop memory across four 2 GB modules. It uses the DDR2 800 standard, also labelled PC2-6400, with a CAS latency of CL6 and a default voltage of 1.8 V. The sticks are 240-pin unbuffered UDIMMs without ECC or heat spreaders.

Target Systems

The kit suits older desktop motherboards that accept DDR2 UDIMMs and can run at 800 MHz with 1.8 V operation. Builders repairing or upgrading legacy workstations or basic office PCs will find it a direct match. Systems that require registered or ECC memory, or boards limited to slower DDR2 speeds, should look elsewhere.

Deciding Specification

The decisive figure is the DDR2 800 (PC2-6400) speed rating combined with CL6 timing at 1.8 V. If the motherboard specifies this exact speed and voltage the kit will slot in and run at its rated settings without further adjustment.

Highlights

  • 8GB kit expands multitasking headroom with four 2GB modules
  • DDR2 800 PC2-6400 speed matches legacy motherboard specifications
  • CL6 latency at 1.80V keeps timing tight for stable throughput
  • 240-pin UDIMM form factor drops straight into compatible desktop slots
  • Major-brand Samsung, Micron or Hynix chips deliver validated reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR2 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR2 Desktop PC Memory Solutions
Part NumberMD6400-228K4
Capacity8GB (4 x 2GB)
Type240-Pin DDR2 UDIMM
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR2 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 240-pin DDR2 UDIMM modules fit my motherboard's DDR2 slots?

The kit uses the standard 240-pin DDR2 UDIMM form factor, so it fits any desktop board with DDR2 DIMM slots.

What is the correct way to seat the four 2GB sticks, and what step do people often miss?

Open the retention clips, align the notch on each module with the slot key, press down firmly until both clips snap shut, then verify all four are fully latched.

How long will these DDR2 800 modules last before they need replacement?

DDR2 memory has no moving parts and no wear cycle; it typically runs for the life of the system unless physically damaged or a voltage fault occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.