NEMIX RAM 4GB (2x2GB) DDR2 667 desktop RAM
- 4GB (2 x 2GB)
- 240-Pin DDR2 UDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
A four-module kit provides 8 GB of DDR2 800 desktop memory at CL6 latency and 1.8 V
Capacity 8GB (4 x 2GB)
This NEMIX RAM kit provides 8 GB of desktop memory across four 2 GB modules. It uses the DDR2 800 standard, also labelled PC2-6400, with a CAS latency of CL6 and a default voltage of 1.8 V. The sticks are 240-pin unbuffered UDIMMs without ECC or heat spreaders.
The kit suits older desktop motherboards that accept DDR2 UDIMMs and can run at 800 MHz with 1.8 V operation. Builders repairing or upgrading legacy workstations or basic office PCs will find it a direct match. Systems that require registered or ECC memory, or boards limited to slower DDR2 speeds, should look elsewhere.
The decisive figure is the DDR2 800 (PC2-6400) speed rating combined with CL6 timing at 1.8 V. If the motherboard specifies this exact speed and voltage the kit will slot in and run at its rated settings without further adjustment.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR2 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR2 Desktop PC Memory Solutions |
| Part Number | MD6400-228K4 |
| Capacity | 8GB (4 x 2GB) |
| Type | 240-Pin DDR2 UDIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR2 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The kit uses the standard 240-pin DDR2 UDIMM form factor, so it fits any desktop board with DDR2 DIMM slots.
Open the retention clips, align the notch on each module with the slot key, press down firmly until both clips snap shut, then verify all four are fully latched.
DDR2 memory has no moving parts and no wear cycle; it typically runs for the life of the system unless physically damaged or a voltage fault occurs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟