Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX TK-2131 memory upgrade

SKU CH-A658-HE1V4

8 GB DDR3 1333 SODIMM for POSIFLEX TK-2131 kiosk, 1.35 V non-ECC unbuffered memory

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB capacity lets POSIFLEX TK-2131 kiosks handle heavier transaction loads
  • DDR3 1333 MHz speed matches the system bus for stable operation
  • 35 V low-voltage design reduces power draw in always-on terminals
  • 204-pin SODIMM form factor fits the kiosk memory slot without adapters
  • Non-ECC unbuffered modules install in minutes with no configuration required

Targeted POS memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX TK-2131 Stellar Series kiosk. It fits the 204-pin slot and runs at 1333 MHz with a CAS latency of CL9. The module is non-ECC and unbuffered, matching the original system specification.

Sustained-load behaviour

Rigorous stress testing under load is performed on every stick before it ships. The 1.35 V operating voltage helps keep thermals stable during continuous point-of-sale operation. Major OEM chips from Samsung, Micron or Hynix provide consistent throughput for long shifts.

DDR3 interface limits

The PC3-10600 standard caps bandwidth at the rated 1333 MT/s, so this module cannot exceed that ceiling. It is a single 8 GB rank of 2Rx8 organisation and does not support ECC error correction. Systems requiring registered memory or a different voltage will not accept it.

Helstu kostir

  • 8 GB capacity lets POSIFLEX TK-2131 kiosks handle heavier transaction loads
  • DDR3 1333 MHz speed matches the system bus for stable operation
  • 35 V low-voltage design reduces power draw in always-on terminals
  • 204-pin SODIMM form factor fits the kiosk memory slot without adapters
  • Non-ECC unbuffered modules install in minutes with no configuration required

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX TK-2131 kiosk runs continuously?

The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing heat output during all-day operation.

What must the POSIFLEX TK-2131 already have for this 204-pin DDR3 1333 upgrade to work?

An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered memory at PC3-10600 speed.

Will this CL9 DDR3 1333 stick run alongside the original memory already in the TK-2131?

Yes, it is designed for the POSIFLEX TK-2131 Stellar Series and matches the system's DDR3 1333 specification.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.