Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX TK-2131 memory upgrade

SKU CH-A658-HE1V4

8 GB DDR3 1333 SODIMM for POSIFLEX TK-2131 kiosk, 1.35 V non-ECC unbuffered memory

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB capacity lets POSIFLEX TK-2131 kiosks handle heavier transaction loads
  • DDR3 1333 MHz speed matches the system bus for stable operation
  • 35 V low-voltage design reduces power draw in always-on terminals
  • 204-pin SODIMM form factor fits the kiosk memory slot without adapters
  • Non-ECC unbuffered modules install in minutes with no configuration required

Targeted POS memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX TK-2131 Stellar Series kiosk. It fits the 204-pin slot and runs at 1333 MHz with a CAS latency of CL9. The module is non-ECC and unbuffered, matching the original system specification.

Sustained-load behaviour

Rigorous stress testing under load is performed on every stick before it ships. The 1.35 V operating voltage helps keep thermals stable during continuous point-of-sale operation. Major OEM chips from Samsung, Micron or Hynix provide consistent throughput for long shifts.

DDR3 interface limits

The PC3-10600 standard caps bandwidth at the rated 1333 MT/s, so this module cannot exceed that ceiling. It is a single 8 GB rank of 2Rx8 organisation and does not support ECC error correction. Systems requiring registered memory or a different voltage will not accept it.

Points forts

  • 8 GB capacity lets POSIFLEX TK-2131 kiosks handle heavier transaction loads
  • DDR3 1333 MHz speed matches the system bus for stable operation
  • 35 V low-voltage design reduces power draw in always-on terminals
  • 204-pin SODIMM form factor fits the kiosk memory slot without adapters
  • Non-ECC unbuffered modules install in minutes with no configuration required

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX TK-2131 kiosk runs continuously?

The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing heat output during all-day operation.

What must the POSIFLEX TK-2131 already have for this 204-pin DDR3 1333 upgrade to work?

An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered memory at PC3-10600 speed.

Will this CL9 DDR3 1333 stick run alongside the original memory already in the TK-2131?

Yes, it is designed for the POSIFLEX TK-2131 Stellar Series and matches the system's DDR3 1333 specification.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.