BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00279328BTC
במלאי
NEMIX RAM
NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX TK-2131 memory upgrade
8 GB DDR3 1333 SODIMM for POSIFLEX TK-2131 kiosk, 1.35 V non-ECC unbuffered memory
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8 GB capacity lets POSIFLEX TK-2131 kiosks handle heavier transaction loads
- DDR3 1333 MHz speed matches the system bus for stable operation
- 35 V low-voltage design reduces power draw in always-on terminals
- 204-pin SODIMM form factor fits the kiosk memory slot without adapters
- Non-ECC unbuffered modules install in minutes with no configuration required
Targeted POS memory upgrade
This 8 GB DDR3 SODIMM is built for the POSIFLEX TK-2131 Stellar Series kiosk. It fits the 204-pin slot and runs at 1333 MHz with a CAS latency of CL9. The module is non-ECC and unbuffered, matching the original system specification.
Sustained-load behaviour
Rigorous stress testing under load is performed on every stick before it ships. The 1.35 V operating voltage helps keep thermals stable during continuous point-of-sale operation. Major OEM chips from Samsung, Micron or Hynix provide consistent throughput for long shifts.
DDR3 interface limits
The PC3-10600 standard caps bandwidth at the rated 1333 MT/s, so this module cannot exceed that ceiling. It is a single 8 GB rank of 2Rx8 organisation and does not support ECC error correction. Systems requiring registered memory or a different voltage will not accept it.
נקודות עיקריות
- 8 GB capacity lets POSIFLEX TK-2131 kiosks handle heavier transaction loads
- DDR3 1333 MHz speed matches the system bus for stable operation
- 35 V low-voltage design reduces power draw in always-on terminals
- 204-pin SODIMM form factor fits the kiosk memory slot without adapters
- Non-ECC unbuffered modules install in minutes with no configuration required
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
שאלות על הפריט הזה
How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX TK-2131 kiosk runs continuously?
The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing heat output during all-day operation.
What must the POSIFLEX TK-2131 already have for this 204-pin DDR3 1333 upgrade to work?
An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered memory at PC3-10600 speed.
Will this CL9 DDR3 1333 stick run alongside the original memory already in the TK-2131?
Yes, it is designed for the POSIFLEX TK-2131 Stellar Series and matches the system's DDR3 1333 specification.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
