Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Orange circular fan with brown frame, four-pin connector, 80 mm diameter

OEM Industries

OEM Industries PLA08015D12HH 12V .35A 4-pin orange circular fan

SKU CH-NQSP-C8K19

12 V, 0.35 A orange circular fan with 4-pin connector and ball bearing for Gainward GTS 250, GT430 and GTS 450 graphics card coolers

  • Color2-Tone
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 12 V .35 A ball-bearing fan runs quietly and reliably
  • Four-pin PWM connector gives precise speed control
  • Orange blades on brown frame match GAINWARD GTS 250 GT430 GTS450 coolers
  • 64 mm mounting-hole spacing fits standard 80 mm fan cut-outs
  • 87 mm diameter moves ample air for graphics-card cooling

Replacement fan for Gainward cards

The PLA08015D12HH is a 12V circular cooler with orange blades and a brown frame. It draws .35A through a 4-pin connector and uses a ball bearing. The unit is intended as a direct swap for the stock fan on Gainward GTS 250, GT430 and GTS450 graphics cards.

Ball bearing thermals and power

The ball bearing reduces friction for steady airflow at the rated .35A draw. A 4-pin interface allows the host card to regulate speed based on GPU temperature. No LED lighting is present, so the fan adds no extra visual distraction or power load.

Four-hole mounting pattern

Four mounting holes spaced 64mm apart match the reference layout on the named Gainward models. The 87mm diameter fits the existing shroud without modification. No additional brackets, cables or software utilities are bundled with the fan.

Helstu kostir

  • 12 V .35 A ball-bearing fan runs quietly and reliably
  • Four-pin PWM connector gives precise speed control
  • Orange blades on brown frame match GAINWARD GTS 250 GT430 GTS450 coolers
  • 64 mm mounting-hole spacing fits standard 80 mm fan cut-outs
  • 87 mm diameter moves ample air for graphics-card cooling

Tæknilýsing

ModelPLA08015D12HH
Color2-Tone
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Spurningar um þessa vöru

How do I install the PLA08015D12HH fan using the four 64 mm mounting holes?

Align the fan's four mounting holes on a 64 mm square pattern, insert screws through each hole into the heatsink or shroud, and connect the 4-pin PWM connector to the graphics card's fan header so speed control works.

What maintenance will the ball-bearing PLA08015D12HH need over time?

Ball bearings are sealed; no lubrication is required. Clean dust from the orange blades and brown frame periodically with compressed air to maintain airflow and prevent imbalance.

At what point does the 12 V 0.35 A rating limit sustained cooling performance?

The fan draws a fixed 0.35 A at 12 V, so its maximum airflow is capped by that power budget; under prolonged heavy load the card's thermal throttle point will be reached before the fan can spin faster.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.