Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Orange circular fan with brown frame, four-pin connector, 80 mm diameter

OEM Industries

OEM Industries PLA08015D12HH 12V .35A 4-pin orange circular fan

SKU CH-NQSP-C8K19

12 V, 0.35 A orange circular fan with 4-pin connector and ball bearing for Gainward GTS 250, GT430 and GTS 450 graphics card coolers

  • Color2-Tone
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 12 V .35 A ball-bearing fan runs quietly and reliably
  • Four-pin PWM connector gives precise speed control
  • Orange blades on brown frame match GAINWARD GTS 250 GT430 GTS450 coolers
  • 64 mm mounting-hole spacing fits standard 80 mm fan cut-outs
  • 87 mm diameter moves ample air for graphics-card cooling

Replacement fan for Gainward cards

The PLA08015D12HH is a 12V circular cooler with orange blades and a brown frame. It draws .35A through a 4-pin connector and uses a ball bearing. The unit is intended as a direct swap for the stock fan on Gainward GTS 250, GT430 and GTS450 graphics cards.

Ball bearing thermals and power

The ball bearing reduces friction for steady airflow at the rated .35A draw. A 4-pin interface allows the host card to regulate speed based on GPU temperature. No LED lighting is present, so the fan adds no extra visual distraction or power load.

Four-hole mounting pattern

Four mounting holes spaced 64mm apart match the reference layout on the named Gainward models. The 87mm diameter fits the existing shroud without modification. No additional brackets, cables or software utilities are bundled with the fan.

Přednosti

  • 12 V .35 A ball-bearing fan runs quietly and reliably
  • Four-pin PWM connector gives precise speed control
  • Orange blades on brown frame match GAINWARD GTS 250 GT430 GTS450 coolers
  • 64 mm mounting-hole spacing fits standard 80 mm fan cut-outs
  • 87 mm diameter moves ample air for graphics-card cooling

Specifikace

ModelPLA08015D12HH
Color2-Tone
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Otázky k tomuto produktu

How do I install the PLA08015D12HH fan using the four 64 mm mounting holes?

Align the fan's four mounting holes on a 64 mm square pattern, insert screws through each hole into the heatsink or shroud, and connect the 4-pin PWM connector to the graphics card's fan header so speed control works.

What maintenance will the ball-bearing PLA08015D12HH need over time?

Ball bearings are sealed; no lubrication is required. Clean dust from the orange blades and brown frame periodically with compressed air to maintain airflow and prevent imbalance.

At what point does the 12 V 0.35 A rating limit sustained cooling performance?

The fan draws a fixed 0.35 A at 12 V, so its maximum airflow is capped by that power budget; under prolonged heavy load the card's thermal throttle point will be reached before the fan can spin faster.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.