Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Orange circular fan with brown frame, four-pin connector, 80 mm diameter

OEM Industries

OEM Industries PLA08015D12HH 12V .35A 4-pin orange circular fan

SKU CH-NQSP-C8K19

12 V, 0.35 A orange circular fan with 4-pin connector and ball bearing for Gainward GTS 250, GT430 and GTS 450 graphics card coolers

  • Color2-Tone
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 12 V .35 A ball-bearing fan runs quietly and reliably
  • Four-pin PWM connector gives precise speed control
  • Orange blades on brown frame match GAINWARD GTS 250 GT430 GTS450 coolers
  • 64 mm mounting-hole spacing fits standard 80 mm fan cut-outs
  • 87 mm diameter moves ample air for graphics-card cooling

Replacement fan for Gainward cards

The PLA08015D12HH is a 12V circular cooler with orange blades and a brown frame. It draws .35A through a 4-pin connector and uses a ball bearing. The unit is intended as a direct swap for the stock fan on Gainward GTS 250, GT430 and GTS450 graphics cards.

Ball bearing thermals and power

The ball bearing reduces friction for steady airflow at the rated .35A draw. A 4-pin interface allows the host card to regulate speed based on GPU temperature. No LED lighting is present, so the fan adds no extra visual distraction or power load.

Four-hole mounting pattern

Four mounting holes spaced 64mm apart match the reference layout on the named Gainward models. The 87mm diameter fits the existing shroud without modification. No additional brackets, cables or software utilities are bundled with the fan.

Høydepunkter

  • 12 V .35 A ball-bearing fan runs quietly and reliably
  • Four-pin PWM connector gives precise speed control
  • Orange blades on brown frame match GAINWARD GTS 250 GT430 GTS450 coolers
  • 64 mm mounting-hole spacing fits standard 80 mm fan cut-outs
  • 87 mm diameter moves ample air for graphics-card cooling

Spesifikasjoner

ModelPLA08015D12HH
Color2-Tone
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Spørsmål om denne varen

How do I install the PLA08015D12HH fan using the four 64 mm mounting holes?

Align the fan's four mounting holes on a 64 mm square pattern, insert screws through each hole into the heatsink or shroud, and connect the 4-pin PWM connector to the graphics card's fan header so speed control works.

What maintenance will the ball-bearing PLA08015D12HH need over time?

Ball bearings are sealed; no lubrication is required. Clean dust from the orange blades and brown frame periodically with compressed air to maintain airflow and prevent imbalance.

At what point does the 12 V 0.35 A rating limit sustained cooling performance?

The fan draws a fixed 0.35 A at 12 V, so its maximum airflow is capped by that power budget; under prolonged heavy load the card's thermal throttle point will be reached before the fan can spin faster.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.