Orico AXM2 M.2 SATA NVMe enclosure 10Gbps 137x45.8x17.8mm
- Enclosure
- Comes with a silico…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Orico
Tool-free aluminum enclosure fits M.2 NVMe drives 2230 to 2280 and connects at 10Gbps over USB 3.2 Gen 2
Size M.2 NVMe (2-in-1 Cable)
The Orico AXM2-G2-V1-GY-BP is an aluminum M.2 NVMe drive enclosure with a USB 3.2 Gen 2 interface delivering up to 10 Gbps bandwidth. It accepts M-key and B+M-key modules in 2230, 2242, 2260 and 2280 sizes. A tool-free buckle design allows quick installation, and a silicone case with lanyard adds protection and portability. The multi-stacked aluminum shell and thermal pad provide passive cooling.
This enclosure is built for users who need fast external NVMe storage on Windows, macOS, Linux, Android or iOS devices. It supports drives up to 8 TB and requires formatting before first use. Buyers with 2.5-inch SATA SSDs or hard drives cannot use this product because it only accepts M.2 NVMe modules. Systems limited to USB 2.0 will not reach the advertised transfer rates.
The single specification that determines compatibility is the USB 3.2 Gen 2 connection rated at 10 Gbps. Real-world read and write performance reaches 800-1200 MB/s when the host port matches this standard. If the host only provides USB 3.1 or USB 3.0 the enclosure still works but at reduced speed. No external power adapter is required.
| Brand | ORICO |
|---|---|
| Series | ORICO AXM2 |
| Model | AXM2-G2-V1-GY-BP |
| Color | Gray |
| AC Adapter | No |
| Material | Aluminum |
| Type | Enclosure |
| Dimensions | 137*45.8*17.8MM |
| Features | Comes with a silicone protective case and lanyard for enhanced SSD protection and portability. Features an aluminum alloy shell with a multi-stacked heat dissipation design for effective cooling. Supports a 10Gbps transmission rate for fast and reliable data transfer. Dual protocol support for NVME+NGFF, catering to various storage requirements. Fully compatible with Windows, Mac OS, and Linux, and fits M.2 NVME/NGFF SSDs in sizes 2230, 2242, 2260, and 2280. |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The enclosure reaches 800-1200 MB/s read and write with a compatible NVMe SSD, limited by the 10 Gbps USB 3.2 Gen 2 link.
The tray accepts 2230, 2242, 2260 and 2280 NVMe SSDs in both M-key and B&M-key variants.
Slide the latch to unlock the lid, place the SSD squarely on the connector, press down until it clicks, then close the lid so the long silicone pad contacts the controller evenly.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?