Orico AXM2 M.2 SATA NVMe enclosure 10Gbps 137x45.8x17.8mm
- Enclosure
- Comes with a silico…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Orico
Tool-free aluminum enclosure fits M.2 NVMe drives 2230 to 2280 and connects at 10Gbps over USB 3.2 Gen 2
Size M.2 NVMe (2-in-1 Cable)
The Orico AXM2-G2-V1-GY-BP is an aluminum M.2 NVMe drive enclosure with a USB 3.2 Gen 2 interface delivering up to 10 Gbps bandwidth. It accepts M-key and B+M-key modules in 2230, 2242, 2260 and 2280 sizes. A tool-free buckle design allows quick installation, and a silicone case with lanyard adds protection and portability. The multi-stacked aluminum shell and thermal pad provide passive cooling.
This enclosure is built for users who need fast external NVMe storage on Windows, macOS, Linux, Android or iOS devices. It supports drives up to 8 TB and requires formatting before first use. Buyers with 2.5-inch SATA SSDs or hard drives cannot use this product because it only accepts M.2 NVMe modules. Systems limited to USB 2.0 will not reach the advertised transfer rates.
The single specification that determines compatibility is the USB 3.2 Gen 2 connection rated at 10 Gbps. Real-world read and write performance reaches 800-1200 MB/s when the host port matches this standard. If the host only provides USB 3.1 or USB 3.0 the enclosure still works but at reduced speed. No external power adapter is required.
| Brand | ORICO |
|---|---|
| Series | ORICO AXM2 |
| Model | AXM2-G2-V1-GY-BP |
| Color | Gray |
| AC Adapter | No |
| Material | Aluminum |
| Type | Enclosure |
| Dimensions | 137*45.8*17.8MM |
| Features | Comes with a silicone protective case and lanyard for enhanced SSD protection and portability. Features an aluminum alloy shell with a multi-stacked heat dissipation design for effective cooling. Supports a 10Gbps transmission rate for fast and reliable data transfer. Dual protocol support for NVME+NGFF, catering to various storage requirements. Fully compatible with Windows, Mac OS, and Linux, and fits M.2 NVME/NGFF SSDs in sizes 2230, 2242, 2260, and 2280. |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The enclosure reaches 800-1200 MB/s read and write with a compatible NVMe SSD, limited by the 10 Gbps USB 3.2 Gen 2 link.
The tray accepts 2230, 2242, 2260 and 2280 NVMe SSDs in both M-key and B&M-key variants.
Slide the latch to unlock the lid, place the SSD squarely on the connector, press down until it clicks, then close the lid so the long silicone pad contacts the controller evenly.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?