Orico AXM2 M.2 SATA NVMe enclosure 10Gbps 137x45.8x17.8mm
- Enclosure
- Comes with a silico…
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Orico
Tool-free aluminum enclosure fits M.2 NVMe drives 2230 to 2280 and connects at 10Gbps over USB 3.2 Gen 2
Size M.2 NVMe (2-in-1 Cable)
The Orico AXM2-G2-V1-GY-BP is an aluminum M.2 NVMe drive enclosure with a USB 3.2 Gen 2 interface delivering up to 10 Gbps bandwidth. It accepts M-key and B+M-key modules in 2230, 2242, 2260 and 2280 sizes. A tool-free buckle design allows quick installation, and a silicone case with lanyard adds protection and portability. The multi-stacked aluminum shell and thermal pad provide passive cooling.
This enclosure is built for users who need fast external NVMe storage on Windows, macOS, Linux, Android or iOS devices. It supports drives up to 8 TB and requires formatting before first use. Buyers with 2.5-inch SATA SSDs or hard drives cannot use this product because it only accepts M.2 NVMe modules. Systems limited to USB 2.0 will not reach the advertised transfer rates.
The single specification that determines compatibility is the USB 3.2 Gen 2 connection rated at 10 Gbps. Real-world read and write performance reaches 800-1200 MB/s when the host port matches this standard. If the host only provides USB 3.1 or USB 3.0 the enclosure still works but at reduced speed. No external power adapter is required.
| Brand | ORICO |
|---|---|
| Series | ORICO AXM2 |
| Model | AXM2-G2-V1-GY-BP |
| Color | Gray |
| AC Adapter | No |
| Material | Aluminum |
| Type | Enclosure |
| Dimensions | 137*45.8*17.8MM |
| Features | Comes with a silicone protective case and lanyard for enhanced SSD protection and portability. Features an aluminum alloy shell with a multi-stacked heat dissipation design for effective cooling. Supports a 10Gbps transmission rate for fast and reliable data transfer. Dual protocol support for NVME+NGFF, catering to various storage requirements. Fully compatible with Windows, Mac OS, and Linux, and fits M.2 NVME/NGFF SSDs in sizes 2230, 2242, 2260, and 2280. |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The enclosure reaches 800-1200 MB/s read and write with a compatible NVMe SSD, limited by the 10 Gbps USB 3.2 Gen 2 link.
The tray accepts 2230, 2242, 2260 and 2280 NVMe SSDs in both M-key and B&M-key variants.
Slide the latch to unlock the lid, place the SSD squarely on the connector, press down until it clicks, then close the lid so the long silicone pad contacts the controller evenly.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?