Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Red transparent M.2 NVMe enclosure with aluminium plate and USB-C cables

Orico

Orico M.2 NVMe Enclosure USB 3.2 Gen 2 10 Gbps Red

SKU CH-BS8Z-2ZB0X

Tool-free enclosure fits 2230 to 2280 M-key NVMe SSDs and delivers 10 Gbps over USB 3.2 Gen 2 Type-C

  • SizeCompatible with 2230, 2242, 2260, 2280 M.2 NVME (M key) SSD
  • ColorRed
  • External InterfaceUSB 3.1 Type-C
  • AC AdapterNo
  • MaterialAluminum / Plastic
  • Internal InterfaceM.2 NVME M-Key

External Interface USB 3.1 Type-C

Size M.2 NVME PCI-E x 4 M-Key SSD

  • Tool-free sliding closure for quick SSD swaps
  • USB 3.2 Gen 2 delivers 10 Gbps bandwidth
  • Fits 2230 2242 2260 2280 M-key NVMe drives
  • Aluminium and copper thermal design keeps temperatures low
  • Includes USB-C and USB-A cables for broad host compatibility

What it is and who it fits

The Orico enclosure turns a single M.2 NVMe SSD into a portable USB-C drive. It accepts 2230, 2242, 2260 and 2280 M-key modules up to 2 TB. Tool-free sliding closure and two supplied cables make it ready for Windows, Mac or Linux without drivers. The red transparent shell lets you see the installed module.

Practical limits of the USB 3.2 Gen 2 link

The USB 3.2 Gen 2 interface caps theoretical throughput at 10 Gbps. Real-world speed depends on the SSD controller, cable quality and host port implementation. UASP and TRIM support help maintain performance, but the enclosure cannot exceed the bus ceiling. No external power adapter is included, so the host port must supply enough current for the drive.

What this replaces and when to upgrade

It replaces internal-only NVMe storage or slower SATA-based enclosures when you need portable access to an existing M-key module. The jump is worth it if you already own a compatible NVMe SSD and want plug-and-play mobility across multiple machines. Builders who need SATA M.2 support or capacities beyond 2 TB must look elsewhere.

Helstu kostir

  • Tool-free sliding closure for quick SSD swaps
  • USB 3.2 Gen 2 delivers 10 Gbps bandwidth
  • Fits 2230 2242 2260 2280 M-key NVMe drives
  • Aluminium and copper thermal design keeps temperatures low
  • Includes USB-C and USB-A cables for broad host compatibility

Tæknilýsing

BrandORICO
SizeCompatible with 2230, 2242, 2260, 2280 M.2 NVME (M key) SSD
ColorRed
External InterfaceUSB 3.1 Type-C
AC AdapterNo
MaterialAluminum / Plastic
Internal InterfaceM.2 NVME M-Key
FanNo
TypeEnclosure
HDD Count SupportedSingle SSD
Number of Bay1
Maximum Capacity (per Bay)Up to 2TB
PowerNo

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Which SSD lengths does this enclosure accept?

It fits M.2 NVMe M-Key drives in 2230, 2242, 2260 and 2280 sizes, up to 2 TB per bay.

What real-world transfer speed can I expect from the 10 Gbps USB 3.2 Gen 2 link?

The 10 Gbps interface supports UASP and TRIM, so sustained reads and writes approach the drive's own limits rather than the older 5 Gbps ceiling.

Does the USB 3.1 Type-C port limit performance compared with a USB 3.2 Gen 2 port?

USB 3.1 Gen 2 and USB 3.2 Gen 2 are the same 10 Gbps specification, so the port does not cap throughput below the rated 10 Gbps.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.