Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two black 240-pin DDR3 DIMMs, 16GB total, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR3 1333 PC3-10600 CL9 1.5V Desktop RAM

SKU CH-Q2PM-SK1CE

A 16GB dual-channel DDR3 kit running at 1333MHz with CL9 latency and 1.5V operation for desktop upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit doubles memory bandwidth for multitasking
  • DDR3 1333 PC3-10600 CL9 timing matches JEDEC spec for broad desktop compatibility
  • 5 V standard voltage keeps power draw low on supported platforms
  • Unbuffered non-ECC 240-pin DIMMs install easily in consumer motherboards
  • OWC 100 % compliant modules tested in-house for reliable upgrades

16GB dual-channel DDR3 kit

This kit delivers 16GB of DDR3 memory in two 8GB modules rated at 1333MHz with CL9 latency. It is built for desktop systems that accept 240-pin unbuffered DIMMs running at 1.5V. The modules comply with JEDEC PC3-10600 specifications and are non-ECC.

Replaces older DDR3 modules or smaller kits

Upgrading from a 4GB or 8GB DDR3 configuration to this 16GB kit is worthwhile when the platform supports the full capacity and the workload involves multiple open applications. The dual-channel layout matches the motherboard architecture for balanced throughput.

Steady throughput under load

Because the modules operate at the standard 1.5V JEDEC voltage, they maintain their rated 1333MHz speed without requiring elevated voltages that can increase heat. The absence of a heat spreader means airflow across the PCB is the primary cooling path, which is sufficient for typical desktop workloads.

Helstu kostir

  • 16 GB dual-channel kit doubles memory bandwidth for multitasking
  • DDR3 1333 PC3-10600 CL9 timing matches JEDEC spec for broad desktop compatibility
  • 5 V standard voltage keeps power draw low on supported platforms
  • Unbuffered non-ECC 240-pin DIMMs install easily in consumer motherboards
  • OWC 100 % compliant modules tested in-house for reliable upgrades

Tæknilýsing

BrandOWC
Part Number1U3D32R8016P
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this 16GB kit fit a desktop that uses 240-pin DDR3 slots?

Yes, the modules are 240-pin unbuffered DDR3 DIMMs built to JEDEC PC3-10600 1333MHz CL9 1.5V specification, the standard for desktop DDR3 sockets.

Does the kit run at 1.5V or do I need a board that supports lower voltage?

The kit is rated at 1.5V; it requires a motherboard that supplies standard DDR3 1.5V power.

Can I add these two 8GB sticks alongside my existing 4GB DDR3 modules?

Mixing capacities works if the board supports the total 16GB per channel and all modules share 1333MHz CL9 1.5V timings; otherwise the system will downclock to the slowest stick.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.