OWC 4GB (2x2GB) DDR3 1066 PC3-8500 CL7 1.5V UDIMM Kit
- 4GB (2 x 2GB)
- DDR3 1066 (PC3 8500)
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 16GB dual-channel DDR3 kit running at 1333MHz with CL9 latency and 1.5V operation for desktop upgrades
Capacity 16GB (2 x 8GB)
This kit delivers 16GB of DDR3 memory in two 8GB modules rated at 1333MHz with CL9 latency. It is built for desktop systems that accept 240-pin unbuffered DIMMs running at 1.5V. The modules comply with JEDEC PC3-10600 specifications and are non-ECC.
Upgrading from a 4GB or 8GB DDR3 configuration to this 16GB kit is worthwhile when the platform supports the full capacity and the workload involves multiple open applications. The dual-channel layout matches the motherboard architecture for balanced throughput.
Because the modules operate at the standard 1.5V JEDEC voltage, they maintain their rated 1333MHz speed without requiring elevated voltages that can increase heat. The absence of a heat spreader means airflow across the PCB is the primary cooling path, which is sufficient for typical desktop workloads.
| Brand | OWC |
|---|---|
| Part Number | 1U3D32R8016P |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the modules are 240-pin unbuffered DDR3 DIMMs built to JEDEC PC3-10600 1333MHz CL9 1.5V specification, the standard for desktop DDR3 sockets.
The kit is rated at 1.5V; it requires a motherboard that supplies standard DDR3 1.5V power.
Mixing capacities works if the board supports the total 16GB per channel and all modules share 1333MHz CL9 1.5V timings; otherwise the system will downclock to the slowest stick.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟